Difference between revisions of "05/19/2011 n's detector threshold calibration source/(w/source)"

From New IAC Wiki
Jump to navigation Jump to search
 
(11 intermediate revisions by the same user not shown)
Line 1: Line 1:
−
[https://wiki.iac.isu.edu/index.php/N%27s_detector_calibration Go Back]
+
[https://wiki.iac.isu.edu/index.php/Roman_measurements go back]
  
  
−
Below are my counts rate measurements as function of threshold voltage for n's detector. The source was CF252. The distance between source and n's PMT was about 50 cm. The counts rate was calculated as:
+
Below are my counts rate measurements as function of threshold voltage for n's detector. The source was CF252. The distance between source and n's PMT was about 50 cm. It was 1 PMT set up detector and experiment was hold in LDS on May 19 2011.
 +
 
 +
==First the counts rate was calculated as:==
  
 
  <math>\mbox{Rate} = \frac{N_{\mbox{source}} - N_{\mbox{w/source}}}{\mbox{Time}}</math>
 
  <math>\mbox{Rate} = \frac{N_{\mbox{source}} - N_{\mbox{w/source}}}{\mbox{Time}}</math>
Line 22: Line 24:
  
  
−
'''There are no any plateaus, so what is the threshold should be?'''
+
'''There are no any plateaus, so what is the threshold should be?'''. Or maybe we are need to look at something different.
  
  
  
−
Let's recalculate data using the formula:
+
==Let's recalculate all data using the formula:==
  
 
  <math>\mbox{Ratio} = \frac{R_s - R_{w/s}}{R_{w/s}}</math>
 
  <math>\mbox{Ratio} = \frac{R_s - R_{w/s}}{R_{w/s}}</math>
  
−
My data and calculation looks like:
+
Below my data and calculations for the case of -1500 V power supply voltage:
−
* -1500 V
 
  
 
[[File:Table 1500V.png | 1000px]]
 
[[File:Table 1500V.png | 1000px]]
  
−
* -1250 V
+
Below my data and calculations for the case of -1250 V power supply voltage:
  
 
[[File:Table 1250V.png | 1000px]]
 
[[File:Table 1250V.png | 1000px]]
  
−
And below I overlay my results in one plot for linear ratio scale:
+
 
 +
And below I overlay my results (linear scale):
  
 
[[File:Det ratio lin.png | 1000px]]
 
[[File:Det ratio lin.png | 1000px]]
  
−
and for log ratio scale:
+
and in log scale:
  
 
[[File:Det ratio log.png | 1000px]]
 
[[File:Det ratio log.png | 1000px]]
 +
 +
 +
There are two important conclusions at least for this type of PMT was used:
 +
 +
# The desirable threshold is about -50 mV
 +
# The power supply voltage is as expected -1500 V (there are no plateau for -1250 V)
 +
 +
 +
 +
==Let's compare with what Jason did (at different place,different time and different PMT):==
 +
 +
Below are Jason's data and calculations:
 +
 +
[[File:Table Jason.png | 1200px]]
 +
 +
And below I overlay my and Jason's results (linear scale):
 +
 +
[[File:Det ratio1 lin.png | 1000px]]
 +
 +
and in log scale:
 +
 +
[[File:Det ratio1 log.png | 1000px]]
 +
 +
 +
 +
Looks different.
 +
*PMT?
 +
*location?
 +
 +
 +
 +
 +
[https://wiki.iac.isu.edu/index.php/05/19/2011_n%27s_detector_threshold_calibration_source/%28w/source%29 go up]

Latest revision as of 19:01, 24 May 2012

go back


Below are my counts rate measurements as function of threshold voltage for n's detector. The source was CF252. The distance between source and n's PMT was about 50 cm. It was 1 PMT set up detector and experiment was hold in LDS on May 19 2011.

First the counts rate was calculated as:

[math]\mbox{Rate} = \frac{N_{\mbox{source}} - N_{\mbox{w/source}}}{\mbox{Time}}[/math]


First I did my calibration for power supply voltage -1250 V:

Det1 calibraton source 1250V.png Det1 calibraton source 1250 log.png


Second I did my calibration for power supply voltage -1500 V:

Det1 calibraton source 1500V.png Det1 calibraton source 1500 log.png


And bellow I overlay both cases (-1250 V and -1500 V)

Det1 calibraton source 1250 1500.png Det1 calibraton source 1250 1500 log.png


There are no any plateaus, so what is the threshold should be?. Or maybe we are need to look at something different.


Let's recalculate all data using the formula:

[math]\mbox{Ratio} = \frac{R_s - R_{w/s}}{R_{w/s}}[/math]

Below my data and calculations for the case of -1500 V power supply voltage:

Table 1500V.png

Below my data and calculations for the case of -1250 V power supply voltage:

Table 1250V.png


And below I overlay my results (linear scale):

Det ratio lin.png

and in log scale:

Det ratio log.png


There are two important conclusions at least for this type of PMT was used:

  1. The desirable threshold is about -50 mV
  2. The power supply voltage is as expected -1500 V (there are no plateau for -1250 V)


Let's compare with what Jason did (at different place,different time and different PMT):

Below are Jason's data and calculations:

Table Jason.png

And below I overlay my and Jason's results (linear scale):

Det ratio1 lin.png

and in log scale:

Det ratio1 log.png


Looks different.

  • PMT?
  • location?



go up

Retrieved from "https://wiki.iac.isu.edu/index.php?title=05/19/2011_n%27s_detector_threshold_calibration_source/(w/source)&oldid=74563"