Detector Operation and DAQ Setup

From New IAC Wiki
Revision as of 18:28, 30 June 2013 by Abdehait (talk | contribs) (Created page with "=Detector operation= Operating the detector occurs by providing voltage to the HV-circuit connected to the detector components mentioned in the previous section. A CAEN N470 fou…")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

Detector operation

Operating the detector occurs by providing voltage to the HV-circuit connected to the detector components mentioned in the previous section. A CAEN N470 four channel power supply is used for this purpose, using a channel of the power supply allow to increase the voltage difference between the top and bottom side of the GEM preamplifier reaches up to 350 V as the circuit board is provided with a voltage of 2.8 kV.

Another channel of the power supply is used to increase the voltage of the Cathode, when the cathode voltage is 3.1 kV, it will create a a drift voltage up to 300V.

Retrieved from "https://wiki.iac.isu.edu/index.php?title=Detector_Operation_and_DAQ_Setup&oldid=86023"