TF CPAA Log
Jump to navigation
Jump to search
DAQ setup
ADC readout
Running configuration 1495SA (v1495 TS with Scaler and Adc)
| run number | conditions |
| 5352 | looking for HpGE spectrum using 1 micro-Curie Na-22 source |
6/21/13
signal to discriminator is not attenuated
| run number | Source | Detector | Disc (V) | Atten (dB) | Comments |
| 5362 | 9 uCi Na-22 | B | 0.64 | 6 | |
| 5363 | 10 uCi Co-60 | B | 0.64 | 6 | |
| 5372 | 10 uCi Co-60 | 180-3 | 1.96 | 9 | |
| 5373 | 9 uCi Na-22 | 180-3 | 1.96 | 9 | |
| 5374 | 9 uCi Na-22 | 180-3 | 1.96 | 8 | |
| 5375 | 10 uCi Co-60 | 180-3 | 1.96 | 8 | |
| 5377 | 10 uCi Co-60 | 180-3 | 0.42 | 8 | |
| 5378 | 9 uCi Na-22 | 180-3 | 0.42 | 8 | |
| 5379 | 9 uCi Na-22 | 180-3 | 0.64 | 8 | |
| 5380 | 9 uCi Na-22 | 180-3 | 0.80 | 9 | |
| 5381 | 9 uCi Na-22 | 180-3 | 0.80 | 9 | |
| 5382 | 10 uCi Co-60 | B | 0.64 | 6 | |
| 5383 | 9 uCi Na-22 | B | 0.64 | 6 | |
| 5384 | 9 uCi Na-22 | B | 0.64 | 6 | sent detector B output to timing amp used by detector 180-3 |
| 5385 | 9 uCi Na-22 | B | 0.64 | 4 | |
| 5386 | 9 uCi Na-22 | B | 0.64 | 0 | |
| 5387 | 9 uCi Na-22 | B | 0.64 | 0 | increased timing amp to x2 instead of x1 |
| 5388 | 9 uCi Na-22 | B | 0.64 | 4 | |
| 5389 | 9 uCi Na-22 | B | 0.64 | 8 | |
| 5390 | 10 uCi Co-60 | B | 0.64 | 8 |
|
6/25/13
| run number | conditions |
| 5396 | 1 uCi Na-22 source using Detector B, atten = 9db |
| 5397 | 1 uCi Na-22 source using Detector B, atten = 6db, rate is about 140 Hz, discriminator = 0.63 V |
| 5398 | 1 uCi Co-60 source using Detector B, atten = 6db, rate is about 200 Hz, discriminator = 0.63 V |
| 5399 | 10 uCi Co-60 source using Detector B, atten = 6db, rate is about 1460 Hz, discriminator = 0.63 V, 
|
| 5400 | 9 uCi Na-22 source using Detector B, atten = 6db, rate is about 850 Hz, discriminator = 0.63 V,
|