R1 S6 SignalSearchLog
Jump to navigation
Jump to search
Super Layer 1
STB-1
| Layer | Wire | Date | comments |
STB-2
| Layer | Wire | Date | comments |
STB-3
| Layer | Wire | Date | comments |
STB-4
| Layer | Wire | Date | comments |
STB-5
| Layer | Wire | Date | comments |
STB-6
| Layer | Wire | Date | comments |
STB-7
| Layer | Wire | Date | comments |
Super Layer 2
Testing procedure
Things that may cause anomalous noise when looking for signals:
1. STB boards not securely attached to chamber. Make sure center screws are tightened to 14 in. lb's. 2. Scope's termination set to 1Mohm. Set the scope to 50ohm termination.
STB-1
| Layer | Wire | Date | comments |
STB-2
| Layer | Wire | Date | comments |
STB-3
| Layer | Wire | Date | comments |
STB-4
| Layer | Wire | Date | comments |
STB-5
| Layer | Wire | Date | comments |
STB-6
| Layer | Wire | Date | comments |
STB-7
| Layer | Wire | Date | comments |