Sadiq Proposal Defense
Emittance
What is Emittance
In accelerator physics, Cartesian coordinate system was used to describe motion of the accelerated particles. Usually the z-axis of Cartesian coordinate system is set to be along the electron beam line as longitudinal beam direction. X-axis is set to be horizontal and perpendicular to the longitudinal direction, as one of the transverse beam direction. Y-axis is set to be vertical and perpendicular to the longitudinal direction, as another transverse beam direction.
For the convenience of representation, we use [math]\displaystyle{ z }[/math] to represent our transverse coordinates, while discussing emittance. And we would like to express longitudinal beam direction with [math]\displaystyle{ s }[/math]. Our transverse beam profile changes along the beam line, it makes [math]\displaystyle{ z }[/math] is function of [math]\displaystyle{ s }[/math], [math]\displaystyle{ z~(s) }[/math]. The angle of a accelerated charge regarding the designed orbit can be defined as:
[math]\displaystyle{ z'=\frac{dz}{ds} }[/math]
If we plot [math]\displaystyle{ z }[/math] vs. [math]\displaystyle{ z' }[/math], we will get an ellipse. The area of the ellipse is an invariant, which is called Courant-Snyder invariant. The transverse emittance [math]\displaystyle{ \epsilon }[/math] of the beam is defined to be the area of the ellipse, which contains 90% of the particles <ref name="MConte08"> M. Conte and W. W. MacKay, “An Introduction To The Physics Of Particle Accelera tors”, World Scientifc, Singapore, 2008, 2nd Edition, pp. 257-330. </ref>.

Measurement of Emittance with Quad Scanning Method
In quadrupole scan method, a quadrupole and a Yttrium Aluminum Garnet (YAG ) screen was used to measure emittance. Magnetic field strength of the quadrupole was changed in the process and corresponding beam shapes were observed on the screen. Transfer matrix of a quadrupole magnet under thin lens approximation:
- [math]\displaystyle{ \left( \begin{matrix} 1 & 0 \\ -k_{1}L & 1 \end{matrix} \right)=\left( \begin{matrix} 1 & 0 \\ -\frac{1}{f} & 1 \end{matrix} \right) }[/math]
Here, [math]\displaystyle{ k_{1} L }[/math] is quadrupole strength, [math]\displaystyle{ L }[/math] is quadrupole magnet thickness, and f is quadrupole focal length. [math]\displaystyle{ k_{1} L > 0 }[/math] for x-plane, and [math]\displaystyle{ k_{1} L < 0 }[/math] for y-plane. Transfer matrix of a drift space between quadrupole and screen:
- [math]\displaystyle{ \mathbf{S} = \left( \begin{matrix} S_{11} & S_{12} \\S_{21} & S_{22} \end{matrix} \right)=\left( \begin{matrix} 1 & l \\ 0 & 1 \end{matrix} \right) }[/math]
Here, [math]\displaystyle{ l }[/math] ([math]\displaystyle{ S_{12} }[/math]) is the distance from the center of the quadrupole to the screen. Transfer matrix of the scanned region is:
[math]\displaystyle{ \mathbf{M} = \mathbf{SQ} = \begin{pmatrix} m_{11} & m_{12} \\ m_{21} & m_{22} \end{pmatrix}= \begin{pmatrix} S_{11} & S_{12} \\ S_{21} & S_{22} \end{pmatrix} \begin{pmatrix} 1 & 0 \\ -k_1L & 1 \end{pmatrix}= \begin{pmatrix} S_{11} - k_1LS_{12} & S_{12} \\ S_{21} - k_1L S_{22} & S_{22} \end{pmatrix} }[/math]
[math]\displaystyle{ \mathbf{M} }[/math] is related with the beam matrix [math]\displaystyle{ \mathbf{\sigma} }[/math] as:
[math]\displaystyle{
\mathbf{ \sigma_{screen}} =
\mathbf{M \sigma_{quad} M^T} =
\begin{pmatrix}
m_{11} & m_{12} \\
m_{21} & m_{22}
\end{pmatrix}
\begin{pmatrix}
\sigma_{quad, 11} & \sigma_{quad, 12} \\
\sigma_{quad, 21} & \sigma_{quad, 22}
\end{pmatrix}
\begin{pmatrix}
m_{11} & m_{12} \\
m_{21} & m_{22}
\end{pmatrix}
}[/math]
Since:
[math]\displaystyle{ \sigma_{x}=\sqrt{\epsilon_x\beta},~\sigma_{x'}=\sqrt{\epsilon_x\gamma},~\sigma_{xx'}={-\epsilon_x\alpha} }[/math]
[math]\displaystyle{ \mathbf{ \sigma} = \begin{pmatrix} \sigma_{11} & \sigma_{12} \\ \sigma_{21} & \sigma_{22} \end{pmatrix} = \begin{pmatrix} \sigma_{x}^2 & \sigma_{xx'} \\ \sigma_{xx'} & \sigma_{x'}^2 \end{pmatrix} }[/math]
So, [math]\displaystyle{ \mathbf{\sigma} }[/math] matrix can be written as:
[math]\displaystyle{
\mathbf{\sigma}_{quad} =
\begin{pmatrix}
\sigma_{quad, x} & \sigma_{quad, xx'} \\
\sigma_{quad, xx'} & \sigma_{quad, x,}
\end{pmatrix} =
\epsilon_{rms, x}
\begin{pmatrix}
\beta & -\alpha \\
-\alpha & \gamma
\end{pmatrix}
}[/math]
Substituting this give:
[math]\displaystyle{ \mathbf{ \sigma_{screen}} = \mathbf{M \sigma_{quad} M^T} = \begin{pmatrix} m_{11} & m_{12} \\ m_{21} & m_{22} \end{pmatrix} \epsilon_{rms, x} \begin{pmatrix} \beta & -\alpha \\ -\alpha & \gamma \end{pmatrix} \begin{pmatrix} m_{11} & m_{12} \\ m_{21} & m_{22} \end{pmatrix} }[/math]
Dropping off subscript "rms" on emittance [math]\displaystyle{ \epsilon_{rms, x} }[/math]:
[math]\displaystyle{
\sigma_{screen, 11}=\sigma_{screen, x}^2=\epsilon_x (m_{11}^2\beta - 2m_{12}m_{11}\alpha+m_{12}^2\gamma)
}[/math]
Using [math]\displaystyle{ \mathbf{\sigma} }[/math] matrix relations:
[math]\displaystyle{ \sigma_{x}={\epsilon_x\beta},~\sigma_{12}={-\epsilon_x\alpha},~{\epsilon_x\gamma}=\epsilon_x \frac{1+\alpha^2}{\beta}=\frac{\epsilon_x^2+\sigma_{12}^2}{\sigma_{11}} }[/math]
Here [math]\displaystyle{ \sigma_{x} }[/math] is [math]\displaystyle{ \sigma_{screen, x} }[/math]. We got:
[math]\displaystyle{ \sigma_{x}^2=m_{11}^2 \sigma_{11} + 2m_{12}m_{11} \sigma_{12} + m_{12}^2 \frac{\epsilon_x^2+\sigma_{12}^2}{\sigma_{11}} }[/math]
[math]\displaystyle{ \sigma_{x}^2=\sigma_{11} \left(m_{11}^2 + 2m_{11}m_{12}\frac{\sigma_{12}}{\sigma_{11} }+ m_{12}^2\frac{\sigma_{12}^2}{\sigma_{11}^2}\right) + m_{12}\frac{\epsilon_x^2}{\sigma_{11}} }[/math]
[math]\displaystyle{ \sigma_{x}^2=\sigma_{11}\left(m_{11} + m_{12}\frac{\sigma_{12}}{\sigma_{11} }\right)^2 + m_{12}\frac{\epsilon_x^2}{\sigma_{11}} }[/math]
Recall:
[math]\displaystyle{ m_{11} = S_{11}-kLS_{12}~~~~~~m_{12}=S_{12} }[/math]
Substituting and reorganizing result in:
[math]\displaystyle{ \sigma_{x}^2=\sigma_{11} {S_{12}^2}\left(kL - \left( \frac{S_{11}}{S_{12}} + \frac{\sigma_{12}}{\sigma_{11}} \right) \right)^2 + S_{12}^2\frac{\epsilon_x^2}{\sigma_{11}} <math> Introducing constants <math>A }[/math],[math]\displaystyle{ B }[/math], and [math]\displaystyle{ C }[/math]
[math]\displaystyle{ A = \sigma_{11} {S_{12}^2},~~B = \frac{S_{11}}{S_{12}} + \frac{\sigma_{12}}{\sigma_{11}},~~C = S_{12}^2\frac{\epsilon_x^2}{\sigma_{11}} }[/math]
This will simplify equation to:
[math]\displaystyle{ \sigma_{x}^2=A(kL - B)^2 + C = A(kL)^2 - 2AB(kL)+(C+AB^2) }[/math]
It is easy to see that:
[math]\displaystyle{ \epsilon = \frac{\sqrt{AC}}{S_{12}^2} }[/math]
By changing quadrupole magnetic field strength $k$, we can change beam sizes [math]\displaystyle{ \sigma_{x,y} }[/math] on the screen. We make projection to the x, y axes, then fit them with Gaussian fittings to extract rms beam sizes, then plot vs [math]\displaystyle{ \sigma_{x,y} }[/math] vs [math]\displaystyle{ k_{1}L }[/math]. By Fitting a parabola we can find constants [math]\displaystyle{ A }[/math],[math]\displaystyle{ B }[/math], and [math]\displaystyle{ C }[/math], and get emittances.
References
<references/>
Using APA reference style.
Go back: Positrons