GradFinalLab RS
Construct a Schmitt Trigger using the 741 Op Amp
Draw the Schmitt Trigger circuit you constructed. Identify the values of all components
To construct the circuit above I am going to use the following components and voltages:
- [math]\displaystyle{ R_1 = (1.01\pm0.01)\ k\Omega }[/math]
- [math]\displaystyle{ R_2 = (1.01\pm0.01)\ k\Omega }[/math]
- [math]\displaystyle{ R_3 = (10\pm)\ k\Omega }[/math]
- [math]\displaystyle{ \mbox{OP}\ \mbox{AMP}\ 741 }[/math]
- [math]\displaystyle{ V_{ref} = (+15.00\pm0.01)\ V }[/math]
- [math]\displaystyle{ V_{cc} = (+15.00\pm0.01)\ V }[/math]
- [math]\displaystyle{ V_{ee} = (-15.01\pm0.01)\ V }[/math]
Graph [math]\displaystyle{ V_{out} }[/math] as a function of [math]\displaystyle{ V_{in} }[/math]. Is there a hysteresis loop?
Identify the input voltage threshold levels at which a [math]\displaystyle{ V_{in} }[/math] will produce [math]\displaystyle{ V_{out} \approx V_{cc} }[/math]
1) if the output is high:
[math]\displaystyle{ V_2 = \frac{R_{123}}{R_2}V_{ref} + \frac{R_{123}}{R_3}V_{cc} }[/math]
2) if the output is low:
[math]\displaystyle{ V_2^' = \frac{R_{123}}{R_2}V_{ref} - \frac{R_{123}}{R_3}V_{cc} }[/math]
where
[math]\displaystyle{ R_{123} = (R_1 || R_2 || R_3) = \frac{R_1 R_2 R_3}{R_1+R_2+R_3} }[/math]
By substituting the actual values:
[math]\displaystyle{ R_{123} = (R_1 || R_2 || R_3) = \frac{R_1 R_2 R_3}{R_1+R_2+R_3} }[/math]
[math]\displaystyle{ V_2 = \frac{R_{123}}{R_2}V_{ref} + \frac{R_{123}}{R_3}V_{cc} }[/math]
[math]\displaystyle{ V_2^' = \frac{R_{123}}{R_2}V_{ref} - \frac{R_{123}}{R_3}V_{cc} }[/math]
and doing math and handling the error propagation we end up with the following threshold voltages:
[math]\displaystyle{ V_2 = }[/math]
[math]\displaystyle{ V_2^' = }[/math]
Compare the threshold values to what is expected.
Go Back to All Lab Reports Forest_Electronic_Instrumentation_and_Measurement