Calculating the temperature of a 1/2 mil Aluminum converter with energy deposited from a 44 MeV electron beam.
Calculating number of particles per second
We have electron beam of:
Frequency: [math] f=300Hz [/math]
Peak current: [math] I=50 Amps [/math]
Pulse width: [math] ∆t= 50 ps = 5*10^{-11} seconds [/math]
By [math] Q=It [/math], we have [math] N*e=f*I*∆t [/math]
Where [math] N [/math] is the number of electrons that hit the target per second, [math] e [/math] is electron charge and [math] f [/math], [math] I [/math] and [math] ∆t [/math] are given above.
[math] N = \frac {f I ∆t} {e} = \frac {(300 Hz)(50 A) (5*10^{-11} ps)} {1.6*10^{-19} C} = 4.6875*10^{12} [/math]
So, we have around [math] 4.6875*10^{12}[/math] electrons per second or [math] 15.625*10^9 [/math] electrons per pulse.
Calculating the stopping power due to collision of one 44 MeV electron in Aluminum
From NIST ([1] see link here) the stopping power for one electron with energy of 44 MeV in Aluminum is [math] 1.78 MeV cm^2/g [/math].
[math] 1 mil = \frac {1} {1000} inch * 2.54 \frac {cm} {inch} = 0.00254 cm [/math]
The effective length of 1/2 mil Al:
[math] (2.70 \frac {g}{cm^3})(0.00127 cm) = 0.003429 \frac {g}{cm^2} [/math]
The total stopping power due to collisions on Al per incident electron:
[math] (1.78 MeV \frac {cm^2}{g})(0.003429 \frac {g}{cm^2}) = 0.0061 MeV per electron [/math]
The energy deposited per pulse:
[math] (0.0061 \frac {MeV}{electron})(15.625*10^9 \frac {electrons}{pulse}) = 95.3125*10^6 \frac {MeV}{pulse} [/math]
The energy deposited per second:
[math] (95.3125*10^6 \frac {MeV}{pulse})(300 \frac {pulses}{second}) = 28.6*10^9 \frac {MeV}{second} [/math]
Calculating the temperature increase
The power deposited in 1/2 mil Al is:
[math] P = (28.6*10^{15} \frac {eV}{second})(1.6*10^{-19} \frac {C}{eV}) = 4.575*10^{-3} W [/math]
Stefan-Boltzmann Law (Wien Approximation) says [math] P = (0.924)(Area)(\sigma)(T^4) [/math]
Solving for Temperature and taking into account the two sides of the converter we get:
[math] T^4 = \frac {P}{(0.924)(2A)(\sigma)} [/math]
where [math] \sigma [/math] is the Stefan-Boltzmann constant, [math] \sigma = 5.67*10^{-8} \frac {W}{m^2 K^4}. Assume a beam spot diameter on the converter surface of 5mm, or an area of \lt math\gt A = 19.62 mm^2 = 19.62*10^{-6} m^2 [/math].
Go Back