Installing A Cluster

Network configuration

Head nodes works as NAT for slave nodes

eth0 connects to outside world eth1 is internal

Internal network is 10.0.200.0/255.0.0.0

OS installation

Normal server Linux install with the following packages:

• ssh server
• tftpd-hpa
• dhcp3-server
• nfs-kernel-server
• debootstrap

Grab pxelinux from the web

Netbooting

Setting up dhcp

Edit /etc/dhcp3/dhcpd.conf as follows:

dhcpd.conf - note comma between dns servers

Edit /etc/default/dhcp3-server

INTERFACES=eth1

This will avoid dhcp serving on the outside network!

service dhcp3-server start

Setting up tftp

Edit /etc/default/tftpd-hpa

RUN_DAEMON="yes" #had problems with inetd in the past
OPTIONS="-l -a 10.0.200.1 -s /var/lib/tftpboot"

Scheduler installation

The Quick Start Administrator Guide is very helpful.

1. Install

• slurm-llnl
• slurm-llnl-slurmdbd
• slurm-llnl-doc
  • mkdir /var/run/slurm-llnl

Munge

Munge is an authentication framework recommended by slurm. All the configuration it needs is:

root@brems:# /usr/sbin/create-munge-key
Generating a pseudo-random key using /dev/urandom completed.
root@brems:# /etc/init.d/munge start