Clean Room Temp Sensor

From New IAC Wiki
Revision as of 19:33, 4 February 2010 by Buckminst (talk | contribs)
Jump to navigation Jump to search

Notes

1/7/2010

The heat was turned off in the Clean Room.

I turned it on around noon


Sensatronics EM1 probe with 1 temp/humidity probe and 3 temp-only probes.

Main Page human readable

Pipeline Separated Data suitable for scripts

F|71.9|28.1|-999.9|72.1|-999.9|-999.9|71.7|-999.9|-999.9|71.5|-999.9|-999.9

Pipeline Separated Config suitable for scripts

EM2K2G1T165|PHYS_CLEAN_ROOM|Model EM1|12|5.6|1|Group 1|T|Temperature|H|Humidity|W|Wetness|2|Group 2|T|Temperature|H|Humidity|W|Wetness|3|Group 3|T|Temperature|H|Humidity|W|Wetness|4|Group 4|T|Temperature|H|Humidity|W|Wetness

The raw data can be found on hal.iac.isu.edu (134.50.3.188, Nagios/Cacti monitoring server). Note: IP and graph locations are temporary at this time.

Humidity

http://hal.iac.isu.edu/cacti-graphs/graph_7.html

Temperature

http://hal.iac.isu.edu/cacti-graphs/graph_6.html

NOTE: All times are UTC

Daily Graphs (5 Minute Average)

Humidity

http://hal.iac.isu.edu/cacti-graphs/graphs/graph_7_1.png

Temperatures

http://hal.iac.isu.edu/cacti-graphs/graphs/graph_6_1.png

Weekly Graphs (30 Minute Average)

Humidity

http://hal.iac.isu.edu/cacti-graphs/graphs/graph_7_2.png

Temperatures

http://hal.iac.isu.edu/cacti-graphs/graphs/graph_6_2.png