Qweak Chamber machining

From New IAC Wiki
Revision as of 17:55, 28 July 2008 by Oborn (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

Qweak R1 IonChamber OverlayedWelectronProfile.jpg


Install 4, 1/4 inch bolts on each side for Rotator mounting bracket


Ask Chris in survey group about the survey balls they use. See if you can drill holes in chamber for tooling survey ball.

Retrieved from "https://wiki.iac.isu.edu/index.php?title=Qweak_Chamber_machining&oldid=33695"