Kalyan 16 may 08
Table of Results
| Deformation (mm) | |||||
| Analysis No. | E Max | D Max | X Max | Y Max | Z Max |
| Sector 1 | 0.196 | 0.221x | 0.195 | 0.126 | 0.048 |
| Sector 2 | 0.164 | 0.242 | 0.084 | -0.239 | 0.050 |
| Sector 3 | 0.211 | 0.264 | -0.122 | -0.262 | 0.052 |
| Sector 4 | 0.230 | 0.258 | -0.232 | -0.146 | -0.100 |
| Sector 5 | 0.197 | 0.251 | -0.126 | 0.248 | -0.077 |
| Sector 6 | 0.217 | 0.273 | 0.094 | 0.270 | -0.083 |
Sector 1
Analysis 1 Includes just the sector orientation 1 with slices of steel and carbon fiber on polyurethane and Hexcel respectively.
The report generated by ANSYS is available: File:Analysis O slice 1.pdf
 |
|
 |
 |
|
Figure 1: Images of Deflection for Sector 1 Analysis in D,X,Y,Z Directions respectively
Sector 2
Analysis 2 Includes just the sector orientation 2 with slices of steel and carbon fiber on polyurethane and Hexcel respectively.
The report generated by ANSYS is available: File:Analysis O slice 2.pdf
 |
|
 |
 |
|
Figure 2: Images of Deflection for Sector 2 Analysis in D,X,Y,Z Directions respectively
Sector 3
Analysis 3 Includes just the sector orientation 3 with slices of steel and carbon fiber on polyurethane and Hexcel respectively.
The report generated by ANSYS is available: File:Analysis O slice 3.pdf
 |
|
 |
 |
|
Figure 3: Images of Deflection for Sector 3 Analysis in D,X,Y,Z Directions respectively
Sector 4
Analysis 4 Includes just the sector orientation 4 with slices of steel and carbon fiber on polyurethane and Hexcel respectively.
The report generated by ANSYS is available: File:Analysis O slice 4.pdf
 |
|
 |
 |
|
Figure 4: Images of Deflection for Sector 4 Analysis in D,X,Y,Z Directions respectively
Sector 5
Analysis 5 Includes just the sector orientation 5 with slices of steel and carbon fiber on polyurethane and Hexcel respectively.
The report generated by ANSYS is available: File:Analysis O slice 5.pdf
 |
|
 |
 |
|
Figure 5: Images of Deflection for Sector 5 Analysis in D,X,Y,Z Directions respectively
Sector 6
Analysis 6 Includes just the sector orientation 6 with slices of steel and carbon fiber on polyurethane and Hexcel respectively.
The report generated by ANSYS is available: File:Analysis O slice 6.pdf
 |
|
 |
 |
|
Figure 6: Images of Deflection for Sector 6 Analysis in D,X,Y,Z Directions respectively