K 4-25-08
Jump to navigation
Jump to search
5 Analysis were carried out as follows.
All of them with Carbon rods, No Hexcel sheet, No mylar sheet. Left hinge was constrained, right hinge was allowed to move along the back Plate length(x-axis) and front face of the nose plate was constrained.
- Wire Loads are 1512N on all the 4 hole areas
Case 1. No gravity
|
| Figure 4.25.08.1: Total Deformation in analysis Case 1 |
The remaining pictures with X, Y, Z Deformations are available atRemaining pictures of Case_1
The analysis report is available at