Experimental Setup
Polyethylene Structure
This section to include type of poly, location, source-detector distance, images, etc
Detector
Include images, model/serial number of detector, physical parameters, etc
Electronics Chain
Include schematic of electronics chain
Components
Each component of electronics chain with make/model, function, and brief description of why it's present
He3 Tube Plateau
Measurements
| 1250V Source Out Data |
|
| Run Number |
Configuration |
Discriminator Threshold (mV) |
Cf-252 Source |
Counts |
Run Time (Sec) |
Count Rate (Hz)
|
| 1 |
Detector on 3D printed stands at +1250V |
125 |
No |
|
100 |
|
| 2 |
Detector on 3D printed stands at +1250V |
145 |
No |
|
100 |
|
| 3 |
Detector on 3D printed stands at +1250V |
155 |
No |
|
100 |
|
| 4 |
Detector on 3D printed stands at +1250V |
160 |
No |
|
100 |
|
| 5 |
Detector on 3D printed stands at +1250V |
165 |
No |
|
100 |
|
| 6 |
Detector on 3D printed stands at +1250V |
170 |
No |
|
100 |
|
| 7 |
Detector on 3D printed stands at +1250V |
175 |
No |
|
100 |
|
| 8 |
Detector on 3D printed stands at +1250V |
185 |
No |
|
100 |
|
| 9 |
Detector on 3D printed stands at +1250V |
205 |
No |
|
100 |
|
| 10 |
Detector on 3D printed stands at +1250V |
225 |
No |
|
100 |
|
| 11 |
Detector on 3D printed stands at +1250V |
245 |
No |
|
100 |
|
| 12 |
Detector on 3D printed stands at +1250V |
255 |
No |
|
100 |
|
| 1250V Source In Data |
|
| Run Number |
Configuration |
Discriminator Threshold (mV) |
Cf-252 Source |
Counts |
Run Time (Sec) |
Count Rate (Hz)
|
| 1 |
Detector on 3D printed stands at +1250V |
125 |
Yes |
|
100 |
|
| 2 |
Detector on 3D printed stands at +1250V |
145 |
Yes |
|
100 |
|
| 3 |
Detector on 3D printed stands at +1250V |
155 |
Yes |
|
100 |
|
| 4 |
Detector on 3D printed stands at +1250V |
160 |
Yes |
|
100 |
|
| 5 |
Detector on 3D printed stands at +1250V |
165 |
Yes |
|
100 |
|
| 6 |
Detector on 3D printed stands at +1250V |
170 |
Yes |
|
100 |
|
| 7 |
Detector on 3D printed stands at +1250V |
175 |
Yes |
|
100 |
|
| 8 |
Detector on 3D printed stands at +1250V |
185 |
Yes |
|
100 |
|
| 9 |
Detector on 3D printed stands at +1250V |
205 |
Yes |
|
100 |
|
| 10 |
Detector on 3D printed stands at +1250V |
225 |
Yes |
|
100 |
|
| 11 |
Detector on 3D printed stands at +1250V |
245 |
Yes |
|
100 |
|
| 12 |
Detector on 3D printed stands at +1250V |
255 |
Yes |
|
100 |
|
| Plateau Plots |
|
 Plateau measurements at 700V, source in and source out overlaid. |
 Plateau measurements at 700V, source in minus source out. |
 Signal to Noise ratio for 700V at different discriminator voltages |
Background Measurements
| 1250V Source Out Data |
|
| Run Number |
Configuration |
Discriminator Threshold (mV) |
Cf-252 Source |
Counts |
Run Time (Sec) |
Count Rate (Hz) |
Uncertainty
|
| 1 |
Detector on poly at +1250V |
255 |
No |
|
100 |
|
|
| 2 |
Detector on poly at +1250V |
255 |
No |
|
100 |
|
|
| 3 |
Detector on poly at +1250V |
255 |
No |
|
100 |
|
|
| 4 |
Detector on poly at +1250V |
255 |
No |
|
100 |
|
|
| 5 |
Detector on poly at +1250V |
255 |
No |
|
100 |
|
|
Repeat of Initial Experimental Setup
Experimental Setup
Polyethylene Structure
This section to include type of poly, location, source-detector distance, images, etc
Detector
Include images, model/serial number of detector, physical parameters, etc
Electronics Chain
Include schematic of electronics chain
Components
Each component of electronics chain with make/model, function, and brief description of why it's present
Measurements
1" Green poly
| 1250V source in |
|
| Run Number |
Configuration |
Discriminator Threshold (mV) |
Cf-252 Source |
Counts |
Run Time (Sec) |
Count Rate (Hz) |
Uncertainty
|
| 1 |
Detector on 3D printed stands at +1250V |
255 |
Yes |
|
100 |
|
|
| 2 |
Detector on 3D printed stands at +1250V |
255 |
Yes |
|
100 |
|
|
| 3 |
Detector on 3D printed stands at +1250V |
255 |
Yes |
|
100 |
|
|
| 4 |
Detector on 3D printed stands at +1250V |
255 |
Yes |
|
100 |
|
|
| 5 |
Detector on 3D printed stands at +1250V |
255 |
Yes |
|
100 |
|
|
2" Green poly (one brick) no thermalizer
| 1250V source in |
|
| Run Number |
Configuration |
Discriminator Threshold (mV) |
Cf-252 Source |
Counts |
Run Time (Sec) |
Count Rate (Hz) |
Uncertainty
|
| 1 |
Detector on 3D printed stands at +1250V |
255 |
Yes |
|
100 |
|
|
| 2 |
Detector on 3D printed stands at +1250V |
255 |
Yes |
|
100 |
|
|
| 3 |
Detector on 3D printed stands at +1250V |
255 |
Yes |
|
100 |
|
|
| 4 |
Detector on 3D printed stands at +1250V |
255 |
Yes |
|
100 |
|
|
| 5 |
Detector on 3D printed stands at +1250V |
255 |
Yes |
|
100 |
|
|
3" Green poly (one brick & sheet)
| 1250V source in |
|
| Run Number |
Configuration |
Discriminator Threshold (mV) |
Cf-252 Source |
Counts |
Run Time (Sec) |
Count Rate (Hz) |
Uncertainty
|
| 1 |
Detector on 3D printed stands at +1250V |
255 |
Yes |
|
100 |
|
|
| 2 |
Detector on 3D printed stands at +1250V |
255 |
Yes |
|
100 |
|
|
| 3 |
Detector on 3D printed stands at +1250V |
255 |
Yes |
|
100 |
|
|
| 4 |
Detector on 3D printed stands at +1250V |
255 |
Yes |
|
100 |
|
|
| 5 |
Detector on 3D printed stands at +1250V |
255 |
Yes |
|
100 |
|
|
4" Green poly (two bricks)
| 1250V source in |
|
| Run Number |
Configuration |
Discriminator Threshold (mV) |
Cf-252 Source |
Counts |
Run Time (Sec) |
Count Rate (Hz) |
Uncertainty
|
| 1 |
Detector on 3D printed stands at +1250V |
255 |
Yes |
|
100 |
|
|
| 2 |
Detector on 3D printed stands at +1250V |
255 |
Yes |
|
100 |
|
|
| 3 |
Detector on 3D printed stands at +1250V |
255 |
Yes |
|
100 |
|
|
| 4 |
Detector on 3D printed stands at +1250V |
255 |
Yes |
|
100 |
|
|
| 5 |
Detector on 3D printed stands at +1250V |
255 |
Yes |
|
100 |
|
|
6" Green poly (three bricks)
| 1250V source in |
|
| Run Number |
Configuration |
Discriminator Threshold (mV) |
Cf-252 Source |
Counts |
Run Time (Sec) |
Count Rate (Hz) |
Uncertainty
|
| 1 |
Detector on 3D printed stands at +1250V |
255 |
Yes |
|
100 |
|
|
| 2 |
Detector on 3D printed stands at +1250V |
255 |
Yes |
|
100 |
|
|
| 3 |
Detector on 3D printed stands at +1250V |
255 |
Yes |
|
100 |
|
|
| 4 |
Detector on 3D printed stands at +1250V |
255 |
Yes |
|
100 |
|
|
| 5 |
Detector on 3D printed stands at +1250V |
255 |
Yes |
|
100 |
|
|
8" Green poly (four bricks)
| 1250V source in |
|
| Run Number |
Configuration |
Discriminator Threshold (mV) |
Cf-252 Source |
Counts |
Run Time (Sec) |
Count Rate (Hz) |
Uncertainty
|
| 1 |
Detector on 3D printed stands at +1250V |
255 |
Yes |
|
100 |
|
|
| 2 |
Detector on 3D printed stands at +1250V |
255 |
Yes |
|
100 |
|
|
| 3 |
Detector on 3D printed stands at +1250V |
255 |
Yes |
|
100 |
|
|
| 4 |
Detector on 3D printed stands at +1250V |
255 |
Yes |
|
100 |
|
|
| 5 |
Detector on 3D printed stands at +1250V |
255 |
Yes |
|
100 |
|
|
Attenuation Experiment using HPGe Lynx System as PSU/DAQ
Experimental Setup
Polyethylene Structure
This section to include type of poly, location, source-detector distance, images, etc
Detector
Include images, model/serial number of detector, physical parameters, etc
Electronics Chain
Include schematic of electronics chain
Components
Each component of electronics chain with make/model, function, and brief description of why it's present
Measurements
Attenuation Experiment using New Modules in Electronics Chain
Experimental Setup
Polyethylene Structure
This section to include type of poly, location, source-detector distance, images, etc
Detector
Include images, model/serial number of detector, physical parameters, etc
Electronics Chain
Include schematic of electronics chain
Components
Each component of electronics chain with make/model, function, and brief description of why it's present
Measurements
Previous Page
CaGaS Phase II
