(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Shot 94
Diode: 1" Al ring diode
Gap: 2.2"
Converter: 0.020" Ta
Vacuum Plate: 0.25" Aluminum
Beam has a very hot spot at the center and drops off rapidly as distance from center increases. *Unknown calibration on OSL reader
*Unknown calibration on OSL reader
*Unknown calibration on OSL reader
X and Y profiles on the same histogram. *Unknown calibration on OSL reader
Current profile of shot 94
Charge calculated:
Total number of electrons:
Shot 93
Diode: 1" Al ring diode
Gap: 2.2"
Converter: 0.020" Ta
Vacuum Plate: 0.25" Aluminum
Beam is flatter than at 25cm but still shows a drop as distance increases. *Unknown calibration on OSL reader
*Unknown calibration on OSL reader
*Unknown calibration on OSL reader
X and Y profiles on the same histogram. *Unknown calibration on OSL reader
Current profile of shot 93
Charge calculated:
Total number of electrons:
Shot 89
Diode: 1" Al ring diode
Gap: 2.2"
Converter: 0.020" Ta
Vacuum Plate: 0.25" Aluminum
Beam is mostly flat at 96cm away
Mean: 6.77, Sigma 60.83, Peak 10615.7
Mean: -5.32, Sigma 36.95, Peak 10717.9
X and Y profiles on the same histogram
TriMeV_Shot_Log