Photofission neutron rate

From New IAC Wiki
Jump to navigation Jump to search

Go back

Overview

The goal of this calculation is to determine the portion of detected neutron singles that originate from photofission in a Th-232 target, as opposed to neutrons from gamma, 1n knockout. MCNP is used to determine the bremsstrahlung energy spectrum entering the experimental cell. This calculation cannot be done entirely in MCNP6 since it is missing cross section tables for Th-232 photofission. The neutron detectors are assumed to have 100% efficiency for neutrons above 0.5 MeV ,and 0% below 0.5 MeV.

calculation

N1nσ1n(Eγ)ϵ1n(Eγ)γ(Eγ)dEγ

Nfissσfiss(Eγ)ϵfissγ(Eγ)dEγ

where, σ1n and σfiss are the cross-sections for 1n knockout and photofission, respectively.

ϵ1n(Eγ) is the fraction of neutrons produced from 1n knockout that are above the 0.5 MeV detection threshold. ϵfiss is a constant equal to the number of fission neutrons above threshold.

γ(Eγ) is the bremsstrahlung photon energy distribution.


NfissNfiss+N1n=0.40


(G,1n).png FractionAbove0.5MeV.png


Go back