HRRL Pos Test 26Jul2012 Data Ana Sub Spcs
Jump to navigation
Jump to search
Cut was done that impose events to be in the 511 keV region on both NaI detectors:
if(run_in==3686) ntuple->Draw("ADC6>>T2_NaI_L","ADC6>900 && ADC6<1500 && ADC5>1000 && ADC5<1550","1/1260"); else if(run_in==3688) ntuple->Draw("ADC6>>T2_NaI_L","ADC6>900 && ADC6<1500 && ADC5>1000 && ADC5<1550","1/2460"); else if(run_in==3690) ntuple->Draw("ADC6>>T2_NaI_L","ADC6>900 && ADC6<1500 && ADC5>1000 && ADC5<1550","1/4228");
if(run_out==3687) ntuple->Draw("ADC6>>T2_out_NaI_L","ADC6>900 && ADC6<1500 && ADC5>1000 && ADC5<1550","1/1411");
else if(run_out==3689) ntuple->Draw("ADC6>>T2_out_NaI_L","ADC6>900 && ADC6<1500 && ADC5>1000 && ADC5<1550","1/2706");
else if(run_out==3691) ntuple->Draw("ADC6>>T2_out_NaI_L","ADC6>900 && ADC6<1500 && ADC5>1000 && ADC5<1550","1/1383");
else if(run_out==3692) ntuple->Draw("ADC6>>T2_out_NaI_L","ADC6>900 && ADC6<1500 && ADC5>1000 && ADC5<1550","1/1238");
Looks like the time normalization was not working.
| runs | NaI right | NaI left |
| r3686-r3687 |  |
|
| r3686-r3689 | |
|
| r3686-r3691 | |
|
| r3686-r3692 | |
|
| runs | NaI right | NaI left | r3688-r3687 |  |
|
| r3688-r3689 | |
| |||
| r3688-r3691 | |
| |||
| r3688-r3692 | |
|
| runs | NaI right | NaI left | r3690-r3687 |  |
|
| r3690-r3689 | |
| |||
| r3690-r3691 | |
| |||
| r3690-r3692 | |
|