Using SEM Instructions
Jump to navigation
Jump to search
1- Putting the sample with the paste face to the inside of the chamber.
2- Be sure that the breaker F6 is on for the pump.
3- A symbol for the chamber on the right bottom of the software layout shows a green color when the chamber is has a pressure of the 0.53 torr.
4- The beam spot is 4.5 works for the paste samples. the sot size changes depending on the sample and the resolution.
5- The height should be within 10 mm from the back scattered electron detector.
6- Based on the sample element content, the brighter color for the heavier elements and dark one for the lighter ones.
Control Buttons
Ctrl+0 for centering the stage.
Middle button for the mouse to raise up the sample to the 10 mm level.