September 23, 2011
Beam Parameters:
- current 160 mA
- pulse width 2 ns
- rep rate 180 Hz
- E = 25 MeV
H2O run
Run # | Beam | Dump magnet | Collimator | add coll | Hardener 1" Al | Radiator 25 um Al | Target | Comments |
---|---|---|---|---|---|---|---|---|
2546 | Up 90A |
In | Open | In | No | In | H20 bottle | Test radiator in/out.
R(bottom) = 2.5E-4 n/pulse -> × 180 Hz × 60 sec/min = 2.70 n/min |
2547 | Up 90A |
In | Open | In | No | Out | H20 bottle | Test radiator in/out.
R(bottom) = 6.1E-6 n/pulse -> × 180 Hz × 60 sec/min = 0.06 n/min |
2548 | Down 86A |
In | Open | In | Yes | In | H20 bottle | Test radiator in/out.
R(bottom) = 1.08E-4 n/pulse -> × 180 Hz × 60 sec/min = 1.17 n/min |
2549 | Up 90A |
In | Open | In | Yes | In | H20 bottle | Test radiator in/out.
R(bottom) = 1.43E-4 n/pulse -> × 180 Hz × 60 sec/min = 1.54 n/min |
2550 | Down 86A |
In | Open | In | Yes | In | H20 bottle | Test radiator in/out.
R(bottom) = 1.72E-4 n/pulse -> × 180 Hz × 60 sec/min = 1.86 n/min |
2551 | Down 86A |
In | Open | In | Yes | Out | H20 bottle | Test radiator in/out.
R(bottom) = 0 n/pulse -> × 180 Hz × 60 sec/min = 0 n/min |
D2O run
Run # | Beam | Dump magnet | Collimator | add coll | Hardener 1" Al | Radiator 25 um Al | Target | Comments |
---|---|---|---|---|---|---|---|---|
2552 | Up 90A |
In | Open | In | Yes | In | DU cylinder |
R(bottom) = 8.7E-4 n/pulse -> × 180 Hz × 60 sec/min = 9.40 n/min |
2553 | Down 86A |
In | Open | In | Yes | Out | DU cylinder |
R(bottom) = 5.8E-5 n/pulse -> × 180 Hz × 60 sec/min = 0.63 n/min |
2554 | Up 90A |
In | Open | In | Yes | In | DU cylinder |
R(bottom) = 8.7E-4 n/pulse -> × 180 Hz × 60 sec/min = 9.40 n/min |
25-- | Down 86A |
In | Open | In | Yes | Out | DU cylinder |
R(bottom) = -- n/pulse -> × 180 Hz × 60 sec/min = -- n/min |
2555 | Down 86A |
In | Open | In | Yes | In | None |
R(bottom) = -- n/pulse -> × 180 Hz × 60 sec/min = -- n/min |