Geometry (44 MeV LINAC exit port)
90[math]\displaystyle{ ^o }[/math] exit port measurements
Critical and Kicker angles
[math]\displaystyle{ \Theta_C = \frac{m_ec^2}{E} }[/math]
[math]\displaystyle{ \Theta_K = tan^{-1}\left(\frac{x_1}{286}\right) = tan^{-1}\left(\frac{1}{\sqrt{2}}\ \frac{\Delta_1}{286}\right) = tan^{-1}\left(\frac{1}{\sqrt{2}}\ tan(\Theta_C)\right) }[/math]
General collimator setup
[math]\displaystyle{ AC = 286\cdot\tan(\Theta_K)\ cm }[/math]
[math]\displaystyle{ A_1C_1 = (286 +183)\cdot\tan(\Theta_K)\ cm }[/math]
[math]\displaystyle{ BD = 286\cdot\tan(\Theta_C/m)\ cm }[/math]
[math]\displaystyle{ B_1D_1 = (286 + 183)\cdot\tan(\Theta_C/m)\ cm }[/math]
[math]\displaystyle{ \alpha = \frac{A_1D_1 - AB}{183} = \frac{(A_1C_1 + C_1D_1/2) - (AC - B_1D_1/2)}{183} }[/math]
[math]\displaystyle{ FA = \frac{AB}{\tan(\alpha)}\ cm }[/math]
[math]\displaystyle{ GH = (286 - FA)\cdot\tan(\alpha)\ cm }[/math]
Funny pictures...
how it looks ([math]\displaystyle{ \Theta_c/2 }[/math], pipe 3")
how it looks 1 ([math]\displaystyle{ \Theta_c/4 }[/math], pipe 3")
how it looks 2 ([math]\displaystyle{ \Theta_c/4 }[/math], pipe 3")
how it looks 4 ([math]\displaystyle{ \Theta_c/2 }[/math], pipe (2 1/2)" and then pipe 4")
need to adjust to converter position
how it looks 5 ([math]\displaystyle{ \Theta_c/2 }[/math], box 3"x4" and then pipe 4")
need to adjust to converter position




