TF CPAA Log
DAQ setup
ADC readout
Running configuration 1495SA (v1495 TS with Scaler and Adc)
| run number | conditions |
| 5352 | looking for HpGE spectrum using 1 micro-Curie Na-22 source |
6/21/13
| run number | Source | Detector | Disc (V) | Atten (dB) | Comments |
| 5362 | 9 uCi Na-22 | B | 0.64 | 9 | |
| 5363 | 10 uCi Co-60 | B | 0.64 | 9 |
6/25/13
| run number | conditions |
| 5396 | 1 uCi Na-22 source using Detector B, atten = 9db |
| 5397 | 1 uCi Na-22 source using Detector B, atten = 6db, rate is about 140 Hz, discriminator = 0.63 V |
| 5398 | 1 uCi Co-60 source using Detector B, atten = 6db, rate is about 200 Hz, discriminator = 0.63 V |
| 5399 | 10 uCi Co-60 source using Detector B, atten = 6db, rate is about 1460 Hz, discriminator = 0.63 V, 
|
| 5400 | 9 uCi Na-22 source using Detector B, atten = 6db, rate is about 850 Hz, discriminator = 0.63 V,
|