GE XVB601 ROC
Configuring the INTEL based GE XVB601 ROC
Configuration out of the box
You can set up a VGA terminal and a USB keyboard into one of the USB slots which seems to recieve input from teh keyboard and output information to the screen
Utility screen
By hitting the "del" key when booting the ROC you can enter into a setup Utility program.
I did
Advanced->Onboard Device, and changed the memory size from 64 MB to 512MB
I also enable Onboard Gigabit LAN 1.
Install using USB DVD drive
- plug in the two USB connectors for the drive
- The drive shows up in the setup utility, select it as the Boot #1 device
References
https://clonwiki.jlab.org/wiki/index.php/GE_XVB601
https://coda.jlab.org/wiki/index.php/Intel-based_VME_Controllers
Drivers for the VME are here:
/site/coda/2.6.1/extensions/linuxvme/RPMs