GradFinalLab RS

Go Back to All Lab Reports

Construct a Schmitt Trigger using the 741 Op Amp

Draw the Schmitt Trigger circuit you constructed. Identify the values of all components

To construct the circuit above I am going to use the following components and voltages:

1. [math]R_1 = R_2 = 1\ k\Omega[/math]
2. [math]R_3 = 10\ k\Omega[/math]
3. [math]\mbox{OP}\ \mbox{AMP}\ 741[/math]
4. [math]V_{ref} = V_{cc} = 15\ V[/math]

Identify the input voltage threshold levels at which a [math] V_{in}[/math] will produce [math]V_{out} \approx V_{cc}[/math]

Because

[math]R = R_1 = R_2 = 1\ k\Omega \ll R_3 = 10\ k\Omega[/math]

we can use the approximate formula to calculate the threshold voltages:

1) if the output is high:

[math]V_2 \cong \frac{V_{ref}}{2} + \frac{R}{2R_3}V_{cc}[/math]

2) if the output is low:

[math]V_2^' \cong \frac{V_{ref}}{2} - \frac{R}{2R_3}V_{cc}[/math]

By substituting the actual values we find:

[math]V_2 \cong \frac{V_{ref}}{2} + \frac{R}{2R_3}V_{cc} = [/math]

[math]V_2^' \cong \frac{V_{ref}}{2} - \frac{R}{2R_3}V_{cc} = [/math]

Compare the threshold values to what is expected.

Go Back to All Lab Reports Forest_Electronic_Instrumentation_and_Measurement