CH Discriminator Dual Pulsing
Discriminators
All needed specifications can be found within the appropriate manual
CAEN N841 Leading Edge Discriminator
Modes: Update and Non-Update
- For use with He3 tube, Update vs Non-update mode did not seem to make a difference in discriminator output.
- See pages 10 & 12 in user manual
Lecroy 821 Quad Discriminator
File:LRS 821 Specifications.pdf
Tektronix DPO 4104 Digital Phosphor Oscilloscope
For reference: Input to discriminators is spec amp output with the following settings
Course gain: 10
Fine gain: 1
Shaping type: Gaussian
Shaping time: 2us
Purple: Input signal from spec amp. Yellow: CAEN Dual Timer using Lecroy Disc as input. Aqua: Lecroy Disc Output. Lime:: CAEN Update Mode Disc Output.
Purple: Input signal from spec amp. Yellow: CAEN Dual Timer using Lecroy Disc as input. Aqua: Lecroy Disc Output. Lime:: CAEN Update Mode Disc Output.
Purple: Input signal from spec amp. Yellow: CAEN Dual Timer using CAEN Disc as input. Aqua: Lecroy Disc Output. Lime:: CAEN Update Mode Disc Output.
Continued Investigations
03/01/2022
- Sourced a function generator
Function generator: Protek 93120 Digital Synthesis Arbitrary Function Generator/Counter
Measurements
I used a DC offset to create a purely negative pulse using a square wave signal ranging from 0 to -1V
| Run Number | Configuration | Generator Rate | Generator Pulse Amplitude (Set) | Generator Pulse Height (Measured) | Counts | Run Time (Sec) | Count Rate (Hz) | Uncertainty | |||
| 1 | Function Gen feeding Scalar | 1.00 KHz | 1.00V | ~1V | |||||||
| 2 | Function Gen feeding Scalar | ||||||||||
| 3 | Function Gen feeding Scalar | ||||||||||
| 4 | Function Gen feeding Scalar | ||||||||||
| 5 | Function Gen feeding Scalar |