12-23-2016
Determine impact of Cf source on HpGe detector (see this page). A measurement was done previously with the Cf source and another HpGe detector for 30 minutes.
| Run # | RunTime (sec) | Configuration |
|---|---|---|
| 5598 | 6 | PAA configuration 10 uCi Na-22 and Co-60 source 32 cm from HpGe face |
| 5599 | 11 | PAA configuration Thorium welding rods on HpGe Face |
| 5600 | 9 | PAA configuration Thorium welding rods on HpGe Face changed threshold from 48 to 57 mV on HpGe trigger |
| 5602 | 157 | PAA configuration Cf source on paperclip, 21 cm of Poly on front HpGe face, HpGe face is 50 cm from Cf source, 4 minute run?, 450 Hz |
| 5603 | 163 | PAA configuration Cf source on paperclip, Poly is out, HpGe face is 50 cm from Cf source, 4 minute run , 450 Hz 
|
| 5607 | 980 | FF configuration Cf source on paperclip, 21 cm of Poly on front HpGe face, HpGe face is 50 cm from Cf source, double coincidence between HpGE and small Scint, 5 Hz |
| 5606 | 562 | FF configuration Cf source on paperclip, 21 cm of Poly on front HpGe face, HpGe face is 50 cm from Cf source, 4 minute run , double coincidence between HpGE and small Scint |
FF->Draw("PADC.PADC785N[3]>>r5602(4096.0.4096)")
FF->Draw("PADC.PADC785N[3]>>r5602N(4096.0.4096)","1/157")
Run 5569 PADC.PADC785N[15]=78 ADC End of Block fc0002b0 Event#688 ADC End of Block fc00026d Event#621 ADC Ch:0 valid=0 value=0 0 PADC.PADC785N[0]=0