CAEN V785N ADC

CAEN peak sensing multi event ADC

Documentation & Specs

http://www.caentechnologies.com/csite/CaenProd.jsp?parent=11&idmod=285

File:V785 rev13 Manual.pdf

Specs:

0-> +4 Volt input

5.7 us conversion time

12 Bit ADC

50 nsec min rise time for input pulse

1 k-Ohm input impedance

250 nsec min gate width

1 msec Max gate width

Data Format

old run on daq1

/data/olddata/r6xxx/r6998.dat

Found CAEN 785 bank with length 19
Header says 0xfa001000 => 16 converted channels
ADC Ch:0        valid=0 value=83        f8004053
ADC Ch:8        valid=0 value=74        f810404a
ADC Ch:1        valid=0 value=72        f8024048
ADC Ch:9        valid=0 value=78        f812404e
ADC Ch:2        valid=0 value=79        f804404f
ADC Ch:10       valid=0 value=68        f8144044
ADC Ch:3        valid=0 value=283       f806411b
ADC Ch:11       valid=0 value=75        f816404b
ADC Ch:4        valid=0 value=63        f808403f
ADC Ch:12       valid=0 value=65        f8184041
ADC Ch:5        valid=0 value=71        f80a4047
ADC Ch:13       valid=0 value=58        f81a403a
ADC Ch:6        valid=0 value=64        f80c4040
ADC Ch:14       valid=0 value=81        f81c4051
ADC Ch:7        valid=0 value=84        f80e4054

Address
Module	address
V775	0x610000
V785	0x20000
V792	0xee0000
V260	0xda0000
V1495	0x80110000
VX1190	0x210000
SIS3610	0x3800
JlabF250	0
Struck3332	0x40

Address
Module	address
V775	0x610000
V785	0x20000
V792	0xee0000
V260	0xda0000
V1495	0x80110000
VX1190	0x210000
SIS3610	0x3800
JlabF250	0
Struck3332	0x40

Address

const PDC_ADDR = 0x0200000

Library functions

c785Clear(ADC_ID);
  c785ClearThresh(ADC_ID);   /* Zero c785 thresholds for all channels*/
  c785Enable(ADC_ID);
  c785Status(ADC_ID,0,0);

stat = c785Dready(ADC_ID);
 if(stat > 0) {
   nwrds = c785ReadEvent(ADC_ID,rol->dabufp);
   if(nwrds<=0) {
      logMsg("ERROR: ADC Read Failed - Status 0x%x\n",nwrds,0,0,0,0,0);
     c785Clear(ADC_ID);
   } else {
      rol->dabufp += nwrds;
   }
 }else{
   logMsg("ERROR: NO data in ADC  datascan = 0x%x\n",stat,0,0,0,0,0);
 c785Clear(ADC_ID)
}

Standalone functions on 2.6.2

A standalone program was created to test the peak sensing ADC functions in the library on the CODA 2.6.2 ROC

error message:

initializing the SIS3610 
Initialized SIS3610 ID 0 at VME (USER) address 0x3800 (0xacfbb800)
gefVmeAttachCallback failed: code 0x3010000b
ERROR: vmeIntConnect failed 

VME_modules