CodyMilne G4Proj
Photon Energy deposition in a pure Ge crystal
Here are is the mass attenuation cross sections for Germanium ---
Here is the range of electrons in Ge as a function of energy ---
Determine the deposition of photons ranging in energy from 10 eV to 3 MeV in a pure Germanium crystal assuming an infinite block.
Attenuation coefficient about 1/5.323 cm = 0.19 cm or about 2 mm to maybe 2 cm?
Create file containing Photon Energy, ProcessID, step #, Energy Lost, Position for each step a photon takes through the Germanium crystal.
Date | Time |
1/26/16 | 1 hour |
1/27/16 | 1 hour |
1/29/16 | 1 hour |
2/4/16 | 1 hour |
2/5/16 | 3 hour |
2/8/16 | 2 hour |
2/9/16 | 2 hour |
2/10/16 | 1 hour |
2/11/16 | 2 hour |
2/14/16 | 2 hour |
2/16/16 | 2.5 hour |
Results of energy loss in Germanium
Why do SN>1 photons loose energy at Z = -9000?
10 eV
1-D plot of events for each step as function of Z
1-D plot of the energy deposited for each step as function of Z
100 eV
Start with
= 100 eV1 keV
Start with
= 1 keV10 keV
Start with
= 10 keVEnergy Deposition
Send photons from inside an infinite crystal at 100, 500, 1000,3000 keV energy. Add up all the energy loss and see if you get delta functions or a delta + tail because GEANT4 stopped taking the photon and thus the energy is not accounted for.
100 keV
Start with
= 100 keV500 keV
Start with
= 500 keVChange units on Y-axis to Energy (eV?)
"No Backscattering" Do another plot with momentum cut Pz>0
Add 9000 to Z-position to start Ge barrier at zero
Initial verification - The first gamma interaction distribution is consistent with the published Ge mass attenuation coefficient at 500keV (0.08212) and a Ge density of 5.323.
Are the 2-D plots energy weights (normalized)? Set the Z-axis color range by hand in cold.
1 MeV
Start with
= 1 MeV3 MeV
Start with
= 3 MeVRuning Types
nohup ../exampleN02 run1.mac > /dev/null &
Divide canvas into 2 x 5