Started testing detector 4 again.

Fake stop time

Discriminator width was decreased from 40 ns (255 on discriminator display) to 6.3 ns (10 on discriminator display)

Discriminator threshold is set to 100 mv

The delay for the fake stop is set to 800 ns

CODA/CODAreader/ROOT_V5.30/R1DC/evio2nt -fr4516.dat > /dev/null

R1DC->Draw("(evt.TDC1190[1][6]-evt.TDC1190[2][6])/10>>(4096,-4096,4096)");

Run 4536

Below is a picture of the typical 800 ns fake stop pulse that should appear as a second hit in the Multihit TDC.

Now decrease delay of fake stop to 400 ns

Terminator test

PMT detector #4 HV at -1000 Volts

Run 4527 had a discriminator threshold set to 100 mv and the terminators were in.

Now change threshold to 50 mv

Terminators in

Discriminator at 20 mv