Difference between revisions of "X-pinch driver 2-bricks fabrication"
Jump to navigation
Jump to search
| Line 28: | Line 28: | ||
12/20/13 | 12/20/13 | ||
*Some changes to parts have been done to accommodate LESKER redesigned cross: | *Some changes to parts have been done to accommodate LESKER redesigned cross: | ||
| − | **1) inner cut increased from 4.5 diameter to 10" diameter to match the cross (drawing #2013.1.001.0010-0008); | + | **1) for Al output plate, the inner cut increased from 4.5 diameter to 10" diameter to match the cross (drawing #2013.1.001.0010-0008); |
| − | **2) anode can slot size increase from 0.4" to 0.5" to march x-pinch wires length (drawing #2013.1.001.0014); | + | **2) for anode can, the slot size increase from 0.4" to 0.5" to march x-pinch wires length (drawing #2013.1.001.0014); |
*LESKER C-0800-275 REASSEMBLED drawing submitted to Spielman for approving (drawing LESKER C-0800-275_REASSEMBLED) | *LESKER C-0800-275 REASSEMBLED drawing submitted to Spielman for approving (drawing LESKER C-0800-275_REASSEMBLED) | ||
*The assembly drawing with included cathode/anode/cross submitted to Spielman for approving (drawing #2013.1.001.0010-0021) | *The assembly drawing with included cathode/anode/cross submitted to Spielman for approving (drawing #2013.1.001.0010-0021) | ||
Revision as of 23:31, 20 December 2013
[go back]
12/10/13
- brick housing (BH) parts (steel/AL/PMMA sheets) drawings approved by Spielman (drawings #2013.1.001.0002-0009)
12/11/13
- VSM Technologies selected as manufactured company for BH parts (drawings #2013.1.001.0002-0009)
12/17/19
- BH parts arrived at IAC and inspected. Kevin is going to assemble and weld them all together.
12/18/19
- Cathode/anode drawings submitted to Spielman for approving (drawings #2013.1.001.0010-0017)
- PMMA_Output_Sheet/Charging_Isolating_Tube drawings submitted to Spielman for approving (drawings #2013.1.001.0018-0019)
- Assembly drawing with included cathode/anode submitted to Spielman for approving (drawing #2013.1.001.0020)
12/19/13
- LESKER reduced 4-way cross (C-0800-275, $890) found as a candidate for vacuum chamber
- LESKER reduced 4-way cross drawing downloaded and incorporated into SolidWorks (assembly file Lesker_C-800_275\C-0800-275_reassembled)
- LESKER reduced 4-way cross redesigned to match our x-pinch driver (drawing file Lesker_C-800_275\LESKER_C-0800-275_REASSEMBLED)
12/20/13
- Some changes to parts have been done to accommodate LESKER redesigned cross:
- 1) for Al output plate, the inner cut increased from 4.5 diameter to 10" diameter to match the cross (drawing #2013.1.001.0010-0008);
- 2) for anode can, the slot size increase from 0.4" to 0.5" to march x-pinch wires length (drawing #2013.1.001.0014);
- LESKER C-0800-275 REASSEMBLED drawing submitted to Spielman for approving (drawing LESKER C-0800-275_REASSEMBLED)
- The assembly drawing with included cathode/anode/cross submitted to Spielman for approving (drawing #2013.1.001.0010-0021)