Difference between revisions of "PosRun 12 09 2013"

Revision as of 17:24, 9 December 2013

Run #	Run Duration (s)	Configuration
6502	min s (54297 pulses)	same as above except: REmoved Al brick beam stop

@@ Line 7: / Line 7: @@
 |-
 |   6502   ||  min  s (54297 pulses) || same as above except: REmoved Al brick beam stop
-|}
-===40 MeV on Tungsten===
-MeV electrons are hitting the positron production Tungsten target
-{| border="1"  |cellpadding="20" cellspacing="0
-|-
-| Run # ||  Run Duration (s) || Configuration
-|-
-|   6503   || 3 min 46  s ( pulses) || Dipoles in positron mode. Al Brick in along 8 inch length
-|-
-|   6504   ||  min  s ( pulses) || same as previous run, Al brick OUT
-|-
-|   6505   ||  min  s ( pulses) || same as previous run, Dipoles in Electron mode, [[File:r6500-04-05_ch3.png| 200 px]]
-|-
-|   6506   ||  min  s ( pulses) || same as previous run, Selection Magnet bending electrons up positioned after 50 micron Ti vacuum window, [[File:r6505-06_ch3.png| 200 px]]
-|-
-|   6507   ||  min  s ( pulses) || same as previous run, dipoles set to positron mode and selection magnet rotated 180 degrees so positrons bend up,
-|-
-|   6508   ||  min  s ( pulses) || same as previous run:increase voltage from -700 to -850
-|-
-|   6509   ||  min  s ( pulses) || same as previous run, installed 2" thick graphite hardener
-|-
-|   6510   ||  min  s ( pulses) || same as previous run, removed graphite hardener and selection magnet, returned to dipoles in electron mode,
 |}