Difference between revisions of "PAA 11-11-13"
Jump to navigation
Jump to search
| Line 29: | Line 29: | ||
| 6689 || Logic Unit in '''AND''' for Au-196 sample 130113-004, increase post amp from 20 to 50, 15 hrs 3x min 51 sec | | 6689 || Logic Unit in '''AND''' for Au-196 sample 130113-004, increase post amp from 20 to 50, 15 hrs 3x min 51 sec | ||
|- | |- | ||
| − | | 6690 || Logic Unit in '''OR''' for Ns-22 sample # 129741, post amp at 50 | + | | 6690 || Logic Unit in '''OR''' for Ns-22 sample # 129741, post amp at 50, only 511 peak because postamp has 1 MeV peak in overflow |
|- | |- | ||
| 6691 || Logic Unit in '''OR''' for Cs-137 sample # 124840, post amp at 50 | | 6691 || Logic Unit in '''OR''' for Cs-137 sample # 124840, post amp at 50 | ||
Revision as of 15:51, 12 November 2013
Irradiated Y-88 and Au=186 for 4 hours at 23 MeV e- energy and
Samples place in Bin A60
Most upstream Ni target is # 130113-001
Ni target between Y-88 and Au is # 130113-002
Au-186 sample is 130113-003 Y-88 sample is 130113-004
Au-196 measurement using Detector D in position F and MPA 181775.mpa
Y-88 measurement using Detector D in position F and MPA 181776.mpa
runlist
| Run | Description | |
| 6686 | Logic Unit in OR for Y-88 sample 130113-004 | |
| 6687 | Logic Unit in OR for Au-196 sample 130113-004, rate too high for DAQ | |
| 6688 | Logic Unit in AND for Au-196 sample 130113-004, using Detector B and NaI, rate was 10 Hz, can see 80 keV peak so I will increase HpGe post amp. | |
| 6689 | Logic Unit in AND for Au-196 sample 130113-004, increase post amp from 20 to 50, 15 hrs 3x min 51 sec | |
| 6690 | Logic Unit in OR for Ns-22 sample # 129741, post amp at 50, only 511 peak because postamp has 1 MeV peak in overflow | |
| 6691 | Logic Unit in OR for Cs-137 sample # 124840, post amp at 50 |