Difference between revisions of "Beam Test Jul 26 2012"
Jump to navigation
Jump to search
(→Tune) |
(→Tune) |
||
| Line 40: | Line 40: | ||
|- | |- | ||
| Current at FC0 || 96 mA | | Current at FC0 || 96 mA | ||
| + | |} | ||
| + | |||
| + | |||
| + | = DAQ runs = | ||
| + | |||
| + | {| border="1" |cellpadding="20" cellspacing="0 | ||
| + | |- | ||
| + | | run# || T1 || T2 || Sweep Magnet|| logic || HV-D2L || HV-D1R || Reprate || start || stop || Int Rate ||comments | ||
| + | | 3679 || in || in || out|| (DL & GunTrig) or (DR & GunTrig) || 1060V || 1080V || 100 || 08:48:00 || :: || 41.7 events/s|| ADC12 has Sintilator1 (Sint @ exit of 90 deg). | ||
| + | |- | ||
|} | |} | ||
Revision as of 15:21, 26 July 2012
Tune
| Energy Switch | Out (High En) |
| Solenoid 1 | 13.9 A |
| Solenoid 2 | 4.1 A |
| Gun Hor | -0 A |
| Gun Ver | +0.2 A |
| Output Hor | -0.3 A |
| Output Ver | -0 A |
| Rep Rate | 17 |
| Gun HV | 10 (Knob Setting) |
| Gun Grid Voltage | 10 (Knob Setting) |
| RF frequency | 2856.321 MHz |
| Modulator HV Power Supply | 4.19 (Knob Setting) |
| RF macro Pulse Length (FWHM) | 300 ns |
| Q1 (A) | -3 |
| Q2 (A) | +0.8 |
| Q3 (A) | +2 |
| Q4 (A) | 0 |
| Q5 (A) | 0 |
| Q6 (A) | 0 |
| Current at FC0 | 96 mA |
DAQ runs
| run# | T1 | T2 | Sweep Magnet | logic | HV-D2L | HV-D1R | Reprate | start | stop | Int Rate | comments | 3679 | in | in | out | (DL & GunTrig) or (DR & GunTrig) | 1060V | 1080V | 100 | 08:48:00 | :: | 41.7 events/s | ADC12 has Sintilator1 (Sint @ exit of 90 deg). |