Difference between revisions of "PePPO 03132012"
Jump to navigation
Jump to search
| Line 69: | Line 69: | ||
| Run#|| run mode|| Run length (sec)||Beam||Target ||Trig Logic|| VME discriminator Threshold (mV)|| HV1 (setting/V) || HV2 (setting/V) || Deadtime || || | | Run#|| run mode|| Run length (sec)||Beam||Target ||Trig Logic|| VME discriminator Threshold (mV)|| HV1 (setting/V) || HV2 (setting/V) || Deadtime || || | ||
|- | |- | ||
| − | | 2902|| sample || | + | | 2902|| sample || 0 || e<math>^-</math> || Chromox || (Det1 OR Det2) || 50 || 2.4/960 || 3/1200 || 93.1818% <math>\pm</math> 10.3874% || |
|- | |- | ||
| 2903|| sample || 203 ||e<math>^-</math> || Empty || (Det1 OR Det2) || 50 || 2.4/960 || 3/1200 || 84.9788% <math>\pm</math>0.106622% || | | 2903|| sample || 203 ||e<math>^-</math> || Empty || (Det1 OR Det2) || 50 || 2.4/960 || 3/1200 || 84.9788% <math>\pm</math>0.106622% || | ||
|- | |- | ||
| − | | 2904|| sample || | + | | 2904|| sample || 452 ||e<math>^-</math> || Empty || Det1 AND Det2 || 50 || 2.4/960 || 3/1200 || 12.2563% <math>\pm</math> 2.32772% || |
|- | |- | ||
| − | | 2905|| sample || | + | | 2905|| sample || 556 || e<math>^-</math> || Chromox || Det1 AND Det2 || 50 || 2.4/960 || 3/1200 || 3.16901% <math>\pm</math> 4.2301% || |
|- | |- | ||
| 2908|| sample || 150 || off || out || (Det1 or Det2) || 50 || 2.4/960 || 3/1200 || 74.0667% <math>\pm</math> 0.157206% || | | 2908|| sample || 150 || off || out || (Det1 or Det2) || 50 || 2.4/960 || 3/1200 || 74.0667% <math>\pm</math> 0.157206% || | ||
|- | |- | ||
| − | | 2909|| sample || | + | | 2909|| sample || 1118 || off || out || (Det1 AND Det2) || 50 || 2.4/960 || 3/1200 || 3.57143% <math>\pm</math>26.9725% || |
|- | |- | ||
|} | |} | ||
Revision as of 15:44, 15 March 2012
Accelerator Configuration
- Accelerator Settings
| beam energy | 6.8 MeV |
| Beam type: | Electron |
| I_average: | 0.3 nA |
| I_peak: | 0.05 A 0.006 duty factor |
| pulse width: | 10 s (it seems on 200 s is possible?) |
| Rate: | 60 Hz |
| PEPPO Spectrometer: | 151.3 A |
Set HV to Detectors
| Signal channel | HV dac | HV (V) | |
| Detectors #1 | A1 | 2.4 | 960 |
| Detectors #2 | A2 | 3.0 | 1200 |
Scope Pictures
CH1: Beam Sync CH2: A1 CH3: A2
| Target | Pictures |
| No Target |  
|
| Chromox Target |  
|
Annihilation Counter Runs
- Signal Definitions for Trigger logic
- SYNC:=60 Hz sync pulse 200 micro seconds long
- Det1:= Annihilation Counter #1 (HV1)
- Det2:=Annihilation Counter #2 (HV2)
| Run# | run mode | Run length (sec) | Beam | Target | Trig Logic | VME discriminator Threshold (mV) | HV1 (setting/V) | HV2 (setting/V) | Deadtime | ||
| 2902 | sample | 0 | e | Chromox | (Det1 OR Det2) | 50 | 2.4/960 | 3/1200 | 93.1818% 10.3874% | ||
| 2903 | sample | 203 | e | Empty | (Det1 OR Det2) | 50 | 2.4/960 | 3/1200 | 84.9788% 0.106622% | ||
| 2904 | sample | 452 | e | Empty | Det1 AND Det2 | 50 | 2.4/960 | 3/1200 | 12.2563% 2.32772% | ||
| 2905 | sample | 556 | e | Chromox | Det1 AND Det2 | 50 | 2.4/960 | 3/1200 | 3.16901% 4.2301% | ||
| 2908 | sample | 150 | off | out | (Det1 or Det2) | 50 | 2.4/960 | 3/1200 | 74.0667% 0.157206% | ||
| 2909 | sample | 1118 | off | out | (Det1 AND Det2) | 50 | 2.4/960 | 3/1200 | 3.57143% 26.9725% |