Difference between revisions of "September 21, 2011"

Revision as of 16:26, 21 September 2011

Beam Parameters:

current 140 mA
pulse width 2 us
rep rate 180 Hz
E = 25 MeV

Initial Test for Verification

Run #	Beam	Dump magnet	Collimator	add coll	Hardener 1" Al	Radiator 25 um Al	Target	Comments
2515	Up 90A	In	Open	In	Yes	Out	DU cylinder	Test radiator in/out. 144632 pulses R(bottom) = 3.4E-5 n/pulse -> × 180 Hz × 60 sec/min = 0.37 n/min R(upstream) = 8.57E-4 e+/pulse
2517	Up 90A	In	Open	In	Yes	In	DU cylinder	Test radiator in/out. 0 pulses R(bottom) = 8.97E-4 n/pulse -> × 180 Hz × 60 sec/min = 9.69 n/min R(upstream) = 17.7E-3 e+/pulse About 95.2% of photons are coming from the radiator according to PS.
2519	Down 86A	In	Open	In	Yes	In	DU cylinder	Test radiator in/out. 0 pulses R(bottom) = 7.9E-4 n/pulse -> × 180 Hz × 60 sec/min = 8.53 n/min R(upstream) = 18.4E-3 e+/pulse
2520	Down 86A	In	Open	In	Yes	Out	DU cylinder	Test radiator in/out. 162652 pulses R(bottom) = 1.2E-5 n/pulse -> × 180 Hz × 60 sec/min = 0.13 n/min R(upstream) = 9.7E-4 e+/pulse About 94.7% of photons are coming from the radiator according to PS.

Production Runs

Run #	Beam	Dump magnet	Collimator	add coll	Hardener 1" Al	Radiator 25 um Al	Target	Comments
2521	Up 90A	In	Open	In	Yes	In	DU cylinder	Long production run: 0 pulses (90 minute run) Operator said the beam is really jittery R(bottom) = 0 n/pulse -> × 180 Hz × 60 sec/min = 0 n/min R(upstream) = 0 e+/pulse
25--	Down 86A	In	Open	In	Yes	In	DU cylinder	Long production run: 0 pulses (90 minute run) R(bottom) = 0 n/pulse -> × 180 Hz × 60 sec/min = 0 n/min R(upstream) = 0 e+/pulse
25--	Down 86A	In	Open	In	Yes	Out	DU cylinder	Long production run: 0 pulses (30 minute run) R(bottom) = 0 n/pulse -> × 180 Hz × 60 sec/min = 0 n/min R(upstream) = 0 e+/pulse
25--	Down 86A	In	Open	In	Yes	In	None	Long production run: 0 pulses (30 minute run) R(bottom) = 0 n/pulse -> × 180 Hz × 60 sec/min = 0 n/min R(upstream) = 0 e+/pulse

go up

@@ Line 70: / Line 70: @@
 R(upstream) = 0 e+/pulse<br>
 |-
-|<span style="color:blue">'''2522'''</span>||<span style="color:Lime">'''Down'''</span><br> 86A||In ||Open ||In ||Yes ||In||DU cylinder
+|<span style="color:blue">'''25--'''</span>||<span style="color:Lime">'''Down'''</span><br> 86A||In ||Open ||In ||Yes ||In||DU cylinder
 |align="left"|<span style="color:blue">'''Long production run: 0 pulses (90 minute run)<br>'''</span>
 R(bottom) = 0 n/pulse -> × 180 Hz × 60 sec/min = <span style="color:Lime"> '''0 n/min'''</span><br>
 R(upstream) = 0 e+/pulse<br>
 |-
-|<span style="color:blue">'''2523'''</span>|| Down <br> 86A||In ||Open ||In ||Yes ||<span style="color:Teal">'''Out'''</span>||DU cylinder
+|<span style="color:blue">'''25--'''</span>|| Down <br> 86A||In ||Open ||In ||Yes ||<span style="color:Teal">'''Out'''</span>||DU cylinder
 |align="left"|<span style="color:blue">'''Long production run: 0 pulses (30 minute run)<br>'''</span>
 R(bottom) = 0 n/pulse ->  × 180 Hz × 60 sec/min =  <span style="color:Teal"> '''0 n/min'''</span><br>
 R(upstream) = 0 e+/pulse<br>
 |-
-|<span style="color:blue">'''2524'''</span>||<span style="color:hotpink">Up</span><br> 90A||In ||Open ||In ||Yes ||In||DU cylinder
+|<span style="color:blue">'''25--'''</span>|| Down <br> 86A||In ||Open ||In ||Yes ||In ||<span style="color:OrangeRed">'''None'''</span>
-|align="left"|<span style="color:blue">'''Long production run: 0 pulses (20 minute run)<br>'''</span>
-R(bottom) = 0 n/pulse -> × 180 Hz × 60 sec/min =  <span style="color:hotpink"> '''0 n/min'''</span><br>
-R(upstream) = 0 e+/pulse<br>
-|-
-|<span style="color:blue">'''2525'''</span>||<span style="color:hotpink">Up</span><br> 90A||In ||Open ||In ||Yes ||In||DU cylinder
-|align="left"|<span style="color:blue">'''Long production run: 0 pulses (70 minute run)<br>'''</span>
-R(bottom) = 0 n/pulse -> × 180 Hz × 60 sec/min =  <span style="color:hotpink"> '''0 n/min'''</span><br>
-R(upstream) = 0 e+/pulse<br>
-|-
-|<span style="color:blue">'''2526'''</span>||<span style="color:green">Down</span><br> 86A||In ||Open ||In ||Yes ||In||DU cylinder
-|align="left"|<span style="color:blue">'''Long production run: 0 pulses (90 minute run)<br>'''</span>
-R(bottom) = 0 n/pulse -> × 180 Hz × 60 sec/min = <span style="color:green"> '''0 n/min'''</span><br>
-R(upstream) = 0 e+/pulse<br>
-|-
-|<span style="color:blue">'''2527'''</span>|| Down <br> 86A||In ||Open ||In ||Yes ||<span style="color:aqua">Out</span>||DU cylinder
-|align="left"|<span style="color:blue">'''Long production run: 0 pulses (20 minute run)<br>'''</span>
-R(bottom) = 0 n/pulse ->  × 180 Hz × 60 sec/min =  <span style="color:aqua"> '''0 n/min'''</span><br>
-R(upstream) = 0 e+/pulse<br>
-|-
-|<span style="color:blue">'''2528'''</span>|| Down <br> 86A||In ||Open ||In ||Yes ||In ||<span style="color:brown">None</span>
 |align="left"|<span style="color:blue">'''Long production run: 0 pulses (30 minute run)<br>'''</span>
-R(bottom) = 0 n/pulse ->  × 180 Hz × 60 sec/min =  <span style="color:brown"> '''0 n/min'''</span><br>
+R(bottom) = 0 n/pulse ->  × 180 Hz × 60 sec/min =  <span style="color:OrangeRedn"> '''0 n/min'''</span><br>
 R(upstream) = 0 e+/pulse<br>
 |-

Difference between revisions of "September 21, 2011"

Revision as of 16:26, 21 September 2011

Beam Parameters:

Initial Test for Verification

Production Runs

Navigation menu

Search