Difference between revisions of "Installing A Cluster"
Jump to navigation
Jump to search
(Created page with '==Network configuration== Head nodes works as NAT for slave nodes eth0 connects to outside world eth1 is internal Internal network is 10.0.200.0/255.0.0.0 ==OS installation== ...') |
|||
| Line 46: | Line 46: | ||
* slurm-llnl-slurmdbd | * slurm-llnl-slurmdbd | ||
* slurm-llnl-doc | * slurm-llnl-doc | ||
| + | ** mkdir /var/run/slurm-llnl | ||
Revision as of 17:54, 28 May 2010
Network configuration
Head nodes works as NAT for slave nodes
eth0 connects to outside world eth1 is internal
Internal network is 10.0.200.0/255.0.0.0
OS installation
Normal server Linux install with the following packages:
- ssh server
- tftpd-hpa
- dhcp3-server
- nfs-kernel-server
- debootstrap
Grab pxelinux from the web
Netbooting
Setting up dhcp
Edit /etc/dhcp3/dhcpd.conf as follows:
dhcpd.conf - note comma between dns servers
Edit /etc/default/dhcp3-server
INTERFACES=eth1
This will avoid dhcp serving on the outside network!
service dhcp3-server start
Setting up tftp
Edit /etc/default/tftpd-hpa
RUN_DAEMON="yes" #had problems with inetd in the past OPTIONS="-l -a 10.0.200.1 -s /var/lib/tftpboot"
Setting up nfs
Testing
Scheduler installation
Install
- slurm-llnl
- slurm-llnl-slurmdbd
- slurm-llnl-doc
- mkdir /var/run/slurm-llnl