Difference between revisions of "Gumstix Installation"
Jump to navigation
Jump to search
| Line 11: | Line 11: | ||
;<math>I^2C</math> Connection | ;<math>I^2C</math> Connection | ||
| + | |||
| + | {| border="1" |cellpadding="20" cellspacing="0 | ||
| + | |- | ||
| + | | Cable side || Gumstix side | ||
| + | |- | ||
| + | | Blue || Yellow | ||
| + | |- | ||
| + | | White/Green || Red | ||
| + | |- | ||
| + | | White || Green | ||
| + | |- | ||
| + | | Green || Blue | ||
| + | |}<br> | ||
| + | |||
[[File:BreakOutGumstix_5.jpg|200px]] | [[File:BreakOutGumstix_5.jpg|200px]] | ||
Revision as of 21:42, 20 July 2009
- Establishing Connection with Gumstix
The serial connection with Gumstix can be established through the C-kermit or minicom. You can find instructions on the following web pageserial.
Make sure that the TTL RS232 adapter is connected correctly and red(shows that gumstix is connected) and yellow(serial cable) lights are On.
Gumstix username: root
Password:c0d/\2.0
- Connection
| Cable side | Gumstix side |
| Blue | Yellow |
| White/Green | Red |
| White | Green |
| Green | Blue |
