Mylar Linear Small Deflection: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
|||
| Line 1: | Line 1: | ||
= | =Mylar Linear Small Deflection= | ||
Shapes Considered for calculating the Percentage error in results | Shapes Considered for calculating the Percentage error in results | ||
| Line 5: | Line 5: | ||
* Circle with a radius of 50mm and thickness of 0.0254mm | * Circle with a radius of 50mm and thickness of 0.0254mm | ||
* Actual Size of the sheet with 0.254mm Thick | * Actual Size of the sheet with 0.254mm Thick | ||
== Square Section == | |||
=== Ansys Analysis=== | |||
[[Image:Mylar_Square.jpg]] | |||
Total Deformation observed in ANSYS is 1016.6 mm and by hand calculation it is observed to be 1108.6mm | |||
===Hand Calculations== | |||
[[Image:Mylar_rect_table.jpg]] | |||
== Circular Section == | |||
=== Ansys Analysis=== | |||
[[Image:mylar_circular.jpg]] | |||
The Maximum total deformation is observed to be 789.93mm | |||
===Hand Calculations== | |||
[[Image:Mylar_actual.jpg]] | |||
Revision as of 11:50, 9 June 2008
Mylar Linear Small Deflection
Shapes Considered for calculating the Percentage error in results
- Square with rectangular approach of 100mm x 100mm with a thickness of 0.0254mm
- Circle with a radius of 50mm and thickness of 0.0254mm
- Actual Size of the sheet with 0.254mm Thick
Square Section
Ansys Analysis
Total Deformation observed in ANSYS is 1016.6 mm and by hand calculation it is observed to be 1108.6mm
=Hand Calculations
Circular Section
Ansys Analysis
The Maximum total deformation is observed to be 789.93mm
=Hand Calculations
