Difference between revisions of "Linac Run Plan April 2018, Dr. McNulty"
Jump to navigation
Jump to search
(→Table) |
|||
| Line 21: | Line 21: | ||
| Shot # ||Start Time || End Time || Number of Pulses || Number of OSLs || Beam Current | | Shot # ||Start Time || End Time || Number of Pulses || Number of OSLs || Beam Current | ||
|- | |- | ||
| − | | 1 | + | | 1 || 80 || 1 ||50 mA |
|- | |- | ||
| − | | 2 | + | | 2 || || 1 || mA |
|- | |- | ||
| − | | 3 | + | | 3 || || 1 || mA |
|- | |- | ||
| − | | 4 | + | | 4 || || 1 || mA |
|- | |- | ||
| − | | 5 | + | | 5 || || 1 || mA |
|- | |- | ||
| − | | 6 | + | | 6 || || 1 || mA |
|- | |- | ||
| − | | 7 | + | | 7 || || 1 || mA |
|- | |- | ||
| − | | 8 | + | | 8 || || 1 || mA |
|- | |- | ||
| − | | 9 | + | | 9 || || 1 || mA |
|- | |- | ||
| − | | 10 | + | | 10 || || 1 || mA |
|- | |- | ||
| − | | 11 | + | | 11 || || 1 || mA |
|- | |- | ||
|} | |} | ||
Revision as of 20:34, 30 May 2018
Beam Line info
0 degree line
Titanium window = 0.5mm thick. Radius = 23.813mm
Air gap between Titanium window and glass slide = 45mm
Glass slide Thickness = 1mm
Run Plan
To find operating point
- Will use 15 OSLs from reproducibility study to make sure that dose is within acceptable range
Table
Shot # Start Time End Time Number of Pulses Number of OSLs Beam Current 1 80 1 50 mA 2 1 mA 3 1 mA 4 1 mA 5 1 mA 6 1 mA 7 1 mA 8 1 mA 9 1 mA 10 1 mA 11 1 mA
Experiment
85 Nanodot OSLs for use (dose not include OSLs from reproducibility study)
- upper limit of OSLs is 15Gy, want to be around 7.5Gy with multiple pulses
Machine: 25b Linac
Beam Energy: 8 MeV
Rep Rate: Max (150Hz)
Will talk to engineers about double pulsing and guaranteeing number of pulses and update.
Table
Shot # Number of Pulses Number of OSLs Beam Current Aluminum Brick 1 1 mA Out 2 1 mA Out 3 1 mA Out 4 1 mA Out 5 1 mA Out 6 1 mA Out 7 16 mA In 8 16 mA In 9 16 mA Out 10 16 mA Out 11 16 mA Out