Difference between revisions of "LB RunGroupC Vertex"

From New IAC Wiki
Jump to navigation Jump to search
Line 102: Line 102:
  
 
{|border="5"
 
{|border="5"
−
!  || 0.5cm Z Target || 1cm Z Target|| 2cm Z Target || 3cm Z Target || 4cm Z Target || 5cm Z Target || 6cm Z Target  
+
!  || 0.5cm Z Target || 1cm Z Target|| 2cm Z Target || 3cm Z Target || 4cm Z Target || 5cm Z Target  
 
|-
 
|-
−
|| X Resolution (cm) || 0.2705 || 0.2726 || ** || 0.2731 || 0.2702 || 0.2736 ||
+
|| X Resolution (cm) || 0.2705 || 0.2726 || ** || 0.2731 || 0.2702 || 0.2736  
 
|-
 
|-
−
|| Y Resolution (cm) || 0.2041 || 0.2282 || ** || 0.433 || 0.5584 || 0.6454 ||
+
|| Y Resolution (cm) || 0.2041 || 0.2282 || ** || 0.433 || 0.5584 || 0.6454  
 
|-
 
|-
−
|| Z Resolution (cm) || 0.28 || 0.3582 || ** || 0.7927 || 1.034 || 1.253 ||
+
|| Z Resolution (cm) || 0.28 || 0.3582 || ** || 0.7927 || 1.034 || 1.253
 
|-
 
|-
−
|| Generated Vx (cm) || [[ File:05cmZTarg GenPartx.png|200 px]] || [[ File:1cmZTarg GenPartx.png|200px]]|| ** ||[[ File:3cmZTarg GenPartx.png|200px]] || [[File:4cmZTarg GenPartx.png|200px]] || [[File:5cmZTarg GenPartx.png|200px]] ||
+
|| Generated Vx (cm) || [[ File:05cmZTarg GenPartx.png|200 px]] || [[ File:1cmZTarg GenPartx.png|200px]]|| ** ||[[ File:3cmZTarg GenPartx.png|200px]] || [[File:4cmZTarg GenPartx.png|200px]] || [[File:5cmZTarg GenPartx.png|200px]]  
 
|-
 
|-
−
|| Generated Vy (cm) || [[File:0.5ZTarg GenPartY.png|200px]] || [[File:1cmZTarg GenParty.png|200px]] || ** || [[File:3cmZTarg GenParty.png|200px]] || [[File:4cmZTarg GenPartY.png|200px ]] || [[File:5cmZTarg GenPartY.png|200px]] ||
+
|| Generated Vy (cm) || [[File:0.5ZTarg GenPartY.png|200px]] || [[File:1cmZTarg GenParty.png|200px]] || ** || [[File:3cmZTarg GenParty.png|200px]] || [[File:4cmZTarg GenPartY.png|200px ]] || [[File:5cmZTarg GenPartY.png|200px]]
 
|-
 
|-
−
|| Generated Vz (cm) || [[File:05ZTarg GenPartz.png|200px]] || [[File:1cmZTarg GenPartz.png|200px]] || ** || [[File:3cmZTarg GenPartz.png|200px]] || [[File:4cmZTarg GenPartz.png|200px]] || [[File:5cmZTarg GenPartz.png|200px]] ||
+
|| Generated Vz (cm) || [[File:05ZTarg GenPartz.png|200px]] || [[File:1cmZTarg GenPartz.png|200px]] || ** || [[File:3cmZTarg GenPartz.png|200px]] || [[File:4cmZTarg GenPartz.png|200px]] || [[File:5cmZTarg GenPartz.png|200px]]  
 
|-
 
|-
−
|| Reconstructed Vx (cm) || [[File:0.5ZTarg Eventx.png|200px]] || [[File:1cmZTarg Eventx.png|200px]] || ** || [[File:3cmZTarg Eventx.png|200px]] || [[File:4cmZTarg Eventx.png|200px]] || [[File:5cmZTarg Eventx.png|200px]] ||
+
|| Reconstructed Vx (cm) || [[File:0.5ZTarg Eventx.png|200px]] || [[File:1cmZTarg Eventx.png|200px]] || ** || [[File:3cmZTarg Eventx.png|200px]] || [[File:4cmZTarg Eventx.png|200px]] || [[File:5cmZTarg Eventx.png|200px]]
 
|-
 
|-
−
|| Reconstructed Vy (cm) || [[File:0.5ZTarg Eventy.png|200px]] || [[File:1cmZTarg Eventy.png|200px]] || ** || [[File:3cmZTarg Eventy.png|200px]] || [[File:4cmZTarg Eventy.png|200px]] || [[ File:5cmZTarg EventY.png | 200px]] ||
+
|| Reconstructed Vy (cm) || [[File:0.5ZTarg Eventy.png|200px]] || [[File:1cmZTarg Eventy.png|200px]] || ** || [[File:3cmZTarg Eventy.png|200px]] || [[File:4cmZTarg Eventy.png|200px]] || [[ File:5cmZTarg EventY.png | 200px]]  
 
|-
 
|-
−
|| Reconstructed Vz (cm) || [[File:0.5ZTarg Eventz.png|200px]] || [[ File:1cmZTarg Eventz.png|200px]]|| ** || [[File:3cmZTarg Eventz.png|200px]] || [[File:4cmZTarg Eventz.png|200px]] || [[File:5cmZTarg Eventz.png|200px]] ||
+
|| Reconstructed Vz (cm) || [[File:0.5ZTarg Eventz.png|200px]] || [[ File:1cmZTarg Eventz.png|200px]]|| ** || [[File:3cmZTarg Eventz.png|200px]] || [[File:4cmZTarg Eventz.png|200px]] || [[File:5cmZTarg Eventz.png|200px]]  
 
|-
 
|-
−
|| Vx Difference (cm) || [[File:0.5ZTarg VxDiff.png|200px]] || [[File:1cmZTarg VxDiff.png|200px]] || ** || [[File:3cmZTarg VxDiff.png|200px]] || [[File:4cmZTarg VxDiff.png|200px]] || [[File:5cmZTarg VxDiff.png|200px]] ||
+
|| Vx Difference (cm) || [[File:0.5ZTarg VxDiff.png|200px]] || [[File:1cmZTarg VxDiff.png|200px]] || ** || [[File:3cmZTarg VxDiff.png|200px]] || [[File:4cmZTarg VxDiff.png|200px]] || [[File:5cmZTarg VxDiff.png|200px]]  
 
|-
 
|-
−
|| Vy Difference (cm) || [[File:0.5ZTarg VyDiff.png|200px]] || [[File:1cmZTarg VyDiff.png|200px]] || ** || [[File:3cmZTarg VyDiff.png|200px]] || [[File:4cmZTarg VyDiff.png|200px]] || [[File:5cmZTarg VyDiff.png|200px]] ||
+
|| Vy Difference (cm) || [[File:0.5ZTarg VyDiff.png|200px]] || [[File:1cmZTarg VyDiff.png|200px]] || ** || [[File:3cmZTarg VyDiff.png|200px]] || [[File:4cmZTarg VyDiff.png|200px]] || [[File:5cmZTarg VyDiff.png|200px]]  
 
|-
 
|-
−
|| Vz Difference (cm) || [[File:0.5ZTarg VzDiff.png|200px]] || [[ File:1cmZTarg VzDiff.png|200px]]|| ** || [[File:3cmZTarg VzDiff.png|200px]] || [[ File:4cmZTarg VzDiff.png|200px]] || [[File:5cmZTarg VzDiff.png|200px]] ||
+
|| Vz Difference (cm) || [[File:0.5ZTarg VzDiff.png|200px]] || [[ File:1cmZTarg VzDiff.png|200px]]|| ** || [[File:3cmZTarg VzDiff.png|200px]] || [[ File:4cmZTarg VzDiff.png|200px]] || [[File:5cmZTarg VzDiff.png|200px]]  
 
|}<br>
 
|}<br>
  

Revision as of 18:53, 25 July 2016

Vertex Reconstruction studies

Inclusive electron GEMC 2.4 & Coatjava 2.4

LB_GEMC2.4CJ2.4_Vertex



Summary

Set all histogram ranges to -6,6 cm  and bin sizes of 0.1 cm

Point target X,Y,Z=0 cm

No Rastering
Vx Difference NoRaster VxDifference sol.png
Vy Difference NoRaster VyDifference sol.png
Vz Difference NoRaster VzDifference sol.png
X Resolution (cm) 0.2362
Y Resolution(cm) 0.09809
Z Resolution (cm) 0.05435


These histograms raise some questions. To begin I created a LUND file with 6 GeV incident electrons at 25 degrees in theta and 0 degrees in phi. All of the vertex positions were set to 0. I then ran GEMC 2.4 using the command line ~/src/CLAS/GEMC/source/gemc -USE_GUI=0 -INPUT_GEN_FILE="LUND,No_Raster.LUND" -N=75000 eg12_sol_No_Raster.gcard

which created an output file called eg12_sol_75k_No_Raster.ev. After that the reconstruction command line used was

~/src/CLAS/coatjava-2.4/bin/clas12-reconstruction -i eg12_sol_75k_No_Raster.ev-config GEOM::new=true -config MAG::torus=-1.0 -config MAG::solenoid=1.0 -o eg12_sol_75k_No_Raster_rec.evio -s DCHB:DCTB:EC:FTOF:EB -config DATA::mc=true -config DCTB::useRaster=true

After the reconstruction a root file was created using

~/src/CLAS/evio2root/bin/evio2root eg12_sol_75k_No_Raster_rec.evio eg12_sol_75k_No_Raster_rec.root 75000

A plot was then created to show the X Vertex and Y Vertex Differences

NoRaster Vx YDifference.png

The first question is why is there a shift in the Y Difference. What would make X more centered around 0? The next question is when rastering begins, why do the resolutions in the X Vertices remain unchanged while the resolutions in the Y Vertices change?

Point in 2-D but extended target in 1-D

Two vertex variables are fixed at zero and the third vertex variable is altered

2cm X Raster, Y=0,Z=0 2 cm Y Raster, X=0,Z=0 2 cm Z Raster ,X=0,Y=0 6 cm Z Raster ,X=0,Y=0
Vx Difference 1cm XRaster VxDifference sol 75k.png 1cm YRaster VxDifference sol.png 2cm ZRaster VxDifference sol.png 3cm ZRaster VxDifference sol.png
Vy Difference 1cm XRaster VyDifference sol.png YRaster Eventy.png 2cm ZRaster VyDifference sol.png 3cm ZRaster VyDifference sol.png
Vz Difference 1cm XRaster VzDifference sol.png 1cm YRaster VzDifference sol.png 2cm ZRaster VzDifference.png 3cm ZRaster VZDifference sol 75k.png
X Resolution (cm) 0.2658 0.2531 0.2544 0.2539
Y Resolution(cm) 0.1728 0.2368 0.2644 0.6191
Z Resolution (cm) 0.1792 0.1998 0.4318 1.105


Extended target -3 < Z < 3 cm

1cm X Raster 1 cm Y Raster 1 cm X & Y Raster
X Resolution (cm) 0.2696 0.2588 0.2734
Y Resolution (cm) 0.6234 0.6851 0.6927
Z Resolution (cm) 1.136 1.361 1.381
Generated Vx (cm) 3cm ZRaster 1cm XRaster GenX sol.png 3cm ZRaster 1cm YRaster GenX sol.png 3cm ZRaster 1cm XYRaster sol GenPartx.png
Generated Vy (cm) 3cm ZRaster 1cm XRaster GenY sol.png 3cm ZRaster 1cm YRaster GenY sol.png 3cm ZRaster 1cm XYRaster GenParty.png
Generated Vz (cm) 3cm ZRaster 1cm XRaster GenZ sol.png 3cm ZRaster 1cm YRaster GenZ sol.png 3cm ZRaster 1cm XYRaster GenPartz sol.png
Reconstructed Vx (cm) 3cm ZRaster 1cm XRaster EventX sol.png 3cm ZRaster 1cm YRaster EventX sol.png 3cm ZRaster 1cm XYRaster Eventx.png
Reconstructed Vy (cm) 3cm ZRaster 1cm XRaster EventY sol.png 3cm ZRaster 1cm YRaster EventY sol.png 3cm ZRaster 1cm XYRaster Eventy.png
Reconstructed Vz (cm) 3cm ZRaster 1cm XRaster EventZ sol.png 3cm ZRaster 1cm YRaster EventZ sol.png 3cm ZRaster 1cm XYRaster eventz.png
Vx Difference (cm) XZRaster VxDifference 1mmbins.png YZRaster VxDifference 1mmbins.png XYZRaster VxDifference 1mmbins.png
Vy Difference (cm) XZRaster VyDifference 1mmbins.png YZRaster VyDifference 1mmbins.png XYZRaster VyDifference 1mmbins.png
Vz Difference (cm) XZRaster VzDifference 1mmbins.png YZRaster VzDifference 1mmbins.png XYZRaster VzDifference 1mmbins.png



Extended target in Z. Vy shift analysis

All Histograms below were created by simply making the target longer along the Z axis. Each case uses vertex points for X and Y ranging from -1cm to 1cm

0.5cm Z Target 1cm Z Target 2cm Z Target 3cm Z Target 4cm Z Target 5cm Z Target
X Resolution (cm) 0.2705 0.2726 ** 0.2731 0.2702 0.2736
Y Resolution (cm) 0.2041 0.2282 ** 0.433 0.5584 0.6454
Z Resolution (cm) 0.28 0.3582 ** 0.7927 1.034 1.253
Generated Vx (cm) 05cmZTarg GenPartx.png 1cmZTarg GenPartx.png ** 3cmZTarg GenPartx.png 4cmZTarg GenPartx.png 5cmZTarg GenPartx.png
Generated Vy (cm) 0.5ZTarg GenPartY.png 1cmZTarg GenParty.png ** 3cmZTarg GenParty.png 4cmZTarg GenPartY.png 5cmZTarg GenPartY.png
Generated Vz (cm) 05ZTarg GenPartz.png 1cmZTarg GenPartz.png ** 3cmZTarg GenPartz.png 4cmZTarg GenPartz.png 5cmZTarg GenPartz.png
Reconstructed Vx (cm) 0.5ZTarg Eventx.png 1cmZTarg Eventx.png ** 3cmZTarg Eventx.png 4cmZTarg Eventx.png 5cmZTarg Eventx.png
Reconstructed Vy (cm) 0.5ZTarg Eventy.png 1cmZTarg Eventy.png ** 3cmZTarg Eventy.png 4cmZTarg Eventy.png 5cmZTarg EventY.png
Reconstructed Vz (cm) 0.5ZTarg Eventz.png 1cmZTarg Eventz.png ** 3cmZTarg Eventz.png 4cmZTarg Eventz.png 5cmZTarg Eventz.png
Vx Difference (cm) 0.5ZTarg VxDiff.png 1cmZTarg VxDiff.png ** 3cmZTarg VxDiff.png 4cmZTarg VxDiff.png 5cmZTarg VxDiff.png
Vy Difference (cm) 0.5ZTarg VyDiff.png 1cmZTarg VyDiff.png ** 3cmZTarg VyDiff.png 4cmZTarg VyDiff.png 5cmZTarg VyDiff.png
Vz Difference (cm) 0.5ZTarg VzDiff.png 1cmZTarg VzDiff.png ** 3cmZTarg VzDiff.png 4cmZTarg VzDiff.png 5cmZTarg VzDiff.png


It would seem that increasing the length of the target in the Z direction has an effect on the resolution of the Y vertex positions.

Elastic electron proton GEMC 2.4 & Coatjava 2.4

References

https://clasweb.jlab.org/wiki/index.php/TF_EG12_Vertex#Z_resolution_With_micro-megas

EG12#Vertex_Studies

Retrieved from "https://wiki.iac.isu.edu/index.php?title=LB_RunGroupC_Vertex&oldid=107224"