X-talk between n-dets: Difference between revisions
Jump to navigation
Jump to search
Created page with "The simulation of the cross talk between two neutron detectors was performed using GEANT4 program. The simulated detector layout is shown below: [[File:Detector_shielding_setup.…" |
No edit summary |
||
| Line 11: | Line 11: | ||
3) borated poly was placed in between two layers of 1" lead layers. | 3) borated poly was placed in between two layers of 1" lead layers. | ||
The number of incident particle (neutrons) was <math>10^5</math> and their energy spectrum is shown below: | |||
[[File:Espectrum_incident_neutrons.png | 500px]] | |||
Revision as of 15:00, 19 August 2014
The simulation of the cross talk between two neutron detectors was performed using GEANT4 program. The simulated detector layout is shown below:
The following stages of simulation of the x-talk were considered:
1) the x-talk effect is due to the acceptance of the analysing detector, i.e. there was no shielding in between the two detectors;
2) only 2" of borated poly was placed in between;
3) borated poly was placed in between two layers of 1" lead layers.
The number of incident particle (neutrons) was [math]\displaystyle{ 10^5 }[/math] and their energy spectrum is shown below:
