Difference between revisions of "X-pinch driver 2-bricks fabrication"
Jump to navigation
Jump to search
| Line 13: | Line 13: | ||
12/18/19 | 12/18/19 | ||
*cathode/anode drawings submitted to Spielman for approving (drawings #2013.1.001.0010-0017) | *cathode/anode drawings submitted to Spielman for approving (drawings #2013.1.001.0010-0017) | ||
| − | + | *PMMA_output/isolating_charging_line drawings submitted to Spielman for approving (drawings #2013.1.001.0018-0019) | |
12/19/13 | 12/19/13 | ||
| Line 22: | Line 22: | ||
*The whole assemble have been re-drawn to include LESKER reduced 4-way cross (drawing ##2013.1.001.0010-0021) | *The whole assemble have been re-drawn to include LESKER reduced 4-way cross (drawing ##2013.1.001.0010-0021) | ||
**Al output plate changes: | **Al output plate changes: | ||
| − | ***1) inner cut increased from 4.5 diameter to 10" diameter to match the cross(drawing | + | ***1) inner cut increased from 4.5 diameter to 10" diameter to match the cross (drawing #2013.1.001.0010-0008); |
| − | ***2) anode can slot size increase from 0.4" to 0.5" to march x-pinch wires length; | + | ***2) anode can slot size increase from 0.4" to 0.5" to march x-pinch wires length (drawing #2013.1.001.0014); |
Revision as of 23:11, 20 December 2013
[go back]
12/10/13
- brick housing (BH) parts (steel/PMMA) drawings approved by Spielman (drawings #2013.1.001.0002-0009)
12/11/13
- VSM Technologies selected as manufactured company for BH drawings (drawings #2013.1.001.0002-0009)
12/17/19
- BH parts arrived at IAC and inspected. Kevin is going to assemble and weld them all together.
12/18/19
- cathode/anode drawings submitted to Spielman for approving (drawings #2013.1.001.0010-0017)
- PMMA_output/isolating_charging_line drawings submitted to Spielman for approving (drawings #2013.1.001.0018-0019)
12/19/13
- LESKER reduced 4-way cross (C-0800-275, $890) found as candidate for vacuum chamber
12/20/13
- LESKER reduced 4-way cross redesigned and reassembled to match our x-pinch facility (drawing LESKER C-0800-275 REASSEMBLED) and submitted to Spielman for approving
- The whole assemble have been re-drawn to include LESKER reduced 4-way cross (drawing ##2013.1.001.0010-0021)
- Al output plate changes:
- 1) inner cut increased from 4.5 diameter to 10" diameter to match the cross (drawing #2013.1.001.0010-0008);
- 2) anode can slot size increase from 0.4" to 0.5" to march x-pinch wires length (drawing #2013.1.001.0014);
- Al output plate changes: