Difference between revisions of "IAC-QDC Measurements"
Jump to navigation
Jump to search
Line 46: | Line 46: | ||
|Run Number || Start time || End time || Notes | |Run Number || Start time || End time || Notes | ||
|- | |- | ||
− | |6226 || 16:34:09 || 16:46:44 || shutter close V_GEM= V_cat [[File: | + | |6226 || 16:34:09 || 16:46:44 || shutter close V_GEM= V_cat [[File:6226_equalV_sh_close.png | 100 px]] |
|- | |- | ||
− | |6227 || 16:52:39 || 16:58:07 || shutter open V_GEM= V_cat discriminator's threshold decreased to 57 mV [[File: | + | |6227 || 16:52:39 || 16:58:07 || shutter open V_GEM= V_cat discriminator's threshold decreased to 57 mV [[File:6227_equalV_sh_open.png | 100 px]] |
|- | |- | ||
− | |6228 || 17:12:06 || || shutter open V_GEM=2.8 kV V_cat = 3.4 kV [[File: | + | |6228 || 17:12:06 || || shutter open V_GEM=2.8 kV V_cat = 3.4 kV [[File:6228_28_34_sh_open.png | 100 px]] |
Revision as of 23:25, 4 October 2013
09/18/13
Detector voltage is 2.8, 3.4 kV for cathode and GEM. filter Amp. (x4 level 6) is used for amplify the GEM's output, ch#5 is used as an ADC input and ch# 31 in TDC
Run Number | Start time | End time | Notes | |
6075 | 12:39:16 | 13:19:33 | shutter open | |
6077 | 13:34 :37 | 14:19:05 | shutter close, pmt is connected to ch#11 qdc and ch#27 tdc |
10/03/13
Detector voltage is 2.8, 3.4 kV for cathode and GEM. filter Amp. (x2 level 6) is used for amplify the GEM's output, ch#5 is used as an ADC input.
10/04/13
Measurement settings, amp. 1x 50 ns differentiation, discriminator's threshold is 100 mV, so the signal is 100 mV and noise is 30 mV.
discriminator's threshold is lowered to 73 mV to the measure the noise charge on the ADC.