Difference between revisions of "S6 Testing and Performance Summary"
Jump to navigation
Jump to search
(Created page with "=Testing results= == Wire Signal Testing == Signal testing performed to all S6's wires, the testing was simultaneously with the wire burning process. In general the signal is d…") |
|||
| Line 6: | Line 6: | ||
The results are shown in the following table: | The results are shown in the following table: | ||
| + | |||
| + | {| border="1" |cellpadding="20" cellspacing="0 | ||
| + | |- | ||
| + | |Super Layer || STP Board || Notes | ||
| + | |- | ||
| + | | | ||
| + | |||
| + | |} | ||
Revision as of 16:36, 4 August 2013
Testing results
Wire Signal Testing
Signal testing performed to all S6's wires, the testing was simultaneously with the wire burning process. In general the signal is detected when the voltage on the sense wire was 1200V (or more), guard's 535V, and field's -750V.
The results are shown in the following table:
| Super Layer | STP Board | Notes |