Difference between revisions of "HRRL Dec 19 2012Run"
Jump to navigation
Jump to search
(→runs) |
(→runs) |
||
| Line 71: | Line 71: | ||
{| border="1" |cellpadding="20" cellspacing="0 | {| border="1" |cellpadding="20" cellspacing="0 | ||
|- | |- | ||
| − | | run# || T1 || T2 || Sweep Magnet|| logic || HV-D2L || HV-D1R || Reprate || start || stop || Run time (s)|| Int Rate ||comments || event || pulses | + | | run# || T1 || T2 || Sweep Magnet|| logic || HV-D2L || HV-D1R ||Dis Threshold Left ||Dis Threshold Right || Reprate || start || stop || Run time (s)|| Int Rate ||comments || event || pulses |
|- | |- | ||
| − | | 4623 || in || in || out|| (DL & GunTrig) & (DR & GunTrig) || 1100V || 1190V || 300 || 16:43:26|| 16::|| || events/s|| beam pulses || || | + | | 4623 || in || in || out|| (DL & GunTrig) & (DR & GunTrig) || 1100V || 1190V || 5 mV || 5 mV|| 300 || 16:43:26|| 16::|| || events/s|| beam pulses || || |
|- | |- | ||
|} | |} | ||
Revision as of 23:53, 19 December 2012
Tune
| Energy Switch | Out (High En) |
| Solenoid 1 | A |
| Solenoid 2 | A |
| Gun Hor | A |
| Gun Ver | A |
| Output Hor | A |
| Output Ver | A |
| Rep Rate | |
| Gun HV | (Knob Setting) |
| Gun Grid Voltage | (Knob Setting) |
| RF frequency | MHz |
| Modulator HV Power Supply | (Knob Setting) |
| RF macro Pulse Length (FWHM) | 300 ns |
| Q1 (A) | |
| Q2 (A) | |
| Q3 (A) | |
| Q4 (A) | |
| Q5 (A) | |
| Q6 (A) | |
| Current at FC0 | mA |
Radiation on the hole way
Alutia Radiation Test
Alutia is placed in experimental cell side to look at the radiation coming from hall way.
Full Current
300 Hz reprate
300 ns pulse width
Beam is on FC0
CH4 (Green) Alutia
Ch1 (Yellow) FC0
runs
| run# | T1 | T2 | Sweep Magnet | logic | HV-D2L | HV-D1R | Dis Threshold Left | Dis Threshold Right | Reprate | start | stop | Run time (s) | Int Rate | comments | event | pulses |
| 4623 | in | in | out | (DL & GunTrig) & (DR & GunTrig) | 1100V | 1190V | 5 mV | 5 mV | 300 | 16:43:26 | 16:: | events/s | beam pulses |