Difference between revisions of "HRRL Dec 13 2012Run"
Jump to navigation
Jump to search
| Line 91: | Line 91: | ||
| Modulator HV Power Supply || 4.84 (Knob Setting) | | Modulator HV Power Supply || 4.84 (Knob Setting) | ||
|- | |- | ||
| − | | RF macro Pulse Length (FWHM) || | + | | RF macro Pulse Length (FWHM) || 300 ns |
|- | |- | ||
|Q1 (A)|| 0 | |Q1 (A)|| 0 | ||
Revision as of 23:37, 13 December 2012
Settings
Tune by Brian
| Energy Switch | Out (High En) |
| Solenoid 1 top | 16.2 A |
| Solenoid 2 bottom | 6.5 A |
| Gun Hor | -0 A |
| Gun Ver | -0.6 A |
| Output Hor | -0.3 A |
| Output Ver | +0.2 A |
| Rep Rate | 200 Hz |
| Gun HV | 10 (Knob Setting) |
| Gun Grid Voltage | 9.8 (Knob Setting) |
| RF frequency | 2855.866 MHz |
| Modulator HV Power Supply | 4.69 (Knob Setting) |
| RF macro Pulse Length (FWHM) | 90 ns |
| Q1 (A) | -0.5 |
| Q2 (A) | -0.8 |
| Q3 (A) | -0.2 |
| Q4 (A) | +5.0 |
| Q5 (A) | +1.0 |
| Q6 (A) | -4.0 |
| Q7 (A) | -9.0 |
| D8 (A) | off |
| D9 (A) | 22.3 |
| Q10 (A) | -2.5 |
| Q11 (A) | 3.0 |
| Jaw width | 0.76 |
| Scope Image | 
|
Energy Scan
Jaws at 0.5 cm.
D1 (A) Image
Emittance Measurement
| Energy Switch | Out (High En) |
| Solenoid 1 top | 16.2 A |
| Solenoid 2 bottom | 6.5 A |
| Gun Hor | -0.5 A |
| Gun Ver | -0.3 A |
| Output Hor | +6.9 A |
| Output Ver | +7.1 A |
| Rep Rate | 10 Hz |
| Gun HV | 10 (Knob Setting) |
| Gun Grid Voltage | 9.8 (Knob Setting) |
| RF frequency | 2856.097 MHz |
| Modulator HV Power Supply | 4.84 (Knob Setting) |
| RF macro Pulse Length (FWHM) | 300 ns |
| Q1 (A) | 0 |
| Q2 (A) | 0 |
| Q3 (A) | 0 |
| Q4 (A) | 0 |
| Q5 (A) | 0 |
| Q6 (A) | 0 |
| Beam Image on 0 deg OTR | 
|