Difference between revisions of "HRRL Pos Test 26Jul2012 Data Ana Sub Spcs"
Jump to navigation
Jump to search
| Line 44: | Line 44: | ||
| runs || NaI right || NaI left | | runs || NaI right || NaI left | ||
|- | |- | ||
| − | | r3690-r3687 || [[File:hrrl_pos_26jul2012_data_ana_with_Cuts_r3690_sub_r3687_DL.png | 100 px]] || [[File: | + | | r3690-r3687 || [[File:hrrl_pos_26jul2012_data_ana_with_Cuts_r3690_sub_r3687_DL.png | 100 px]] || [[File:hrrl_pos_26jul2012_data_ana_with_Cuts_r3690_sub_r3687_DR.png | 100 px]] |
|- | |- | ||
| − | | r3690-r3689 || [[File: | + | | r3690-r3689 || [[File:hrrl_pos_26jul2012_data_ana_with_Cuts_r3690_sub_r3689_DL.png | 100 px]] || [[File:hrrl_pos_26jul2012_data_ana_with_Cuts_r3690_sub_r3689_DR.png | 100 px]] |
|- | |- | ||
| − | | r3690-r3691 || [[File: | + | | r3690-r3691 || [[File:hrrl_pos_26jul2012_data_ana_with_Cuts_r3690_sub_r3691_DL.png | 100 px]] || [[File:hrrl_pos_26jul2012_data_ana_with_Cuts_r3690_sub_r3691_DR.png | 100 px]] |
|- | |- | ||
| − | | r3690-r3692 || [[File: | + | | r3690-r3692 || [[File:hrrl_pos_26jul2012_data_ana_with_Cuts_r3690_sub_r3692_DL.png | 100 px]] || [[File:hrrl_pos_26jul2012_data_ana_with_Cuts_r3690_sub_r3692_DR.png | 100 px]] |
|} | |} | ||
Revision as of 22:59, 5 August 2012
Cut was done that impose events to be in the 511 keV region on both NaI detectors:
if(run_in==3686) ntuple->Draw("ADC6>>T2_NaI_L","ADC6>900 && ADC6<1500 && ADC5>1000 && ADC5<1550","1/1260"); else if(run_in==3688) ntuple->Draw("ADC6>>T2_NaI_L","ADC6>900 && ADC6<1500 && ADC5>1000 && ADC5<1550","1/2460"); else if(run_in==3690) ntuple->Draw("ADC6>>T2_NaI_L","ADC6>900 && ADC6<1500 && ADC5>1000 && ADC5<1550","1/4228");
if(run_out==3687) ntuple->Draw("ADC6>>T2_out_NaI_L","ADC6>900 && ADC6<1500 && ADC5>1000 && ADC5<1550","1/1411");
else if(run_out==3689) ntuple->Draw("ADC6>>T2_out_NaI_L","ADC6>900 && ADC6<1500 && ADC5>1000 && ADC5<1550","1/2706");
else if(run_out==3691) ntuple->Draw("ADC6>>T2_out_NaI_L","ADC6>900 && ADC6<1500 && ADC5>1000 && ADC5<1550","1/1383");
else if(run_out==3692) ntuple->Draw("ADC6>>T2_out_NaI_L","ADC6>900 && ADC6<1500 && ADC5>1000 && ADC5<1550","1/1238");
Looks like the time normalization was not working.
| runs | NaI left | NaI right |
| r3686-r3687 |  |
|
| r3686-r3689 |  |
|
| r3686-r3691 |  |
|
| r3686-r3692 |  |
|
| runs | NaI right | NaI left |
| r3688-r3687 |  |
|
| r3688-r3689 |  |
|
| r3688-r3691 |  |
|
| r3688-r3692 |  |
|
| runs | NaI right | NaI left |
| r3690-r3687 |  |
|
| r3690-r3689 |  |
|
| r3690-r3691 |  |
|
| r3690-r3692 |  |
|