Difference between revisions of "Beam Test Jul 16 2012"
Jump to navigation
Jump to search
| Line 54: | Line 54: | ||
== Scintillator pulse count == | == Scintillator pulse count == | ||
| + | Scintillator is located at the end of the 90 degree beamlien (after the thin window). Rates measured with W1 in and out. | ||
| Line 65: | Line 66: | ||
| Gun Hor || 0 A | | Gun Hor || 0 A | ||
|- | |- | ||
| − | | Gun Ver || 0.2 A | + | | Gun Ver || +0.2 A |
|- | |- | ||
| − | |Output Hor || 1.2 A | + | |Output Hor || +1.2 A |
|- | |- | ||
| Output Ver || 0 A | | Output Ver || 0 A | ||
| Line 77: | Line 78: | ||
| Gun Grid Voltage || 10 (Knob Setting) | | Gun Grid Voltage || 10 (Knob Setting) | ||
|- | |- | ||
| − | | RF frequency ||2856. | + | | RF frequency ||2856.304 MHz |
|- | |- | ||
| Modulator HV Power Supply || 4.28 (Knob Setting) | | Modulator HV Power Supply || 4.28 (Knob Setting) | ||
| Line 83: | Line 84: | ||
| RF macro Pulse Length (FWHM) || 300 ns | | RF macro Pulse Length (FWHM) || 300 ns | ||
|- | |- | ||
| − | |Q1 (A)|| - | + | |Q1 (A)|| -10 |
|- | |- | ||
| − | |Q2 (A)|| - | + | |Q2 (A)|| -10 |
|- | |- | ||
| − | |Q3 (A)|| | + | |Q3 (A)|| 0 |
|- | |- | ||
| − | |Q4 (A)|| - | + | |Q4 (A)|| -2.3 |
|- | |- | ||
| − | |Q5 (A)|| | + | |Q5 (A)|| 2.5 |
|- | |- | ||
| − | |Q6 (A)|| -3. | + | |Q6 (A)|| -3.5 |
|- | |- | ||
|} | |} | ||
| − | + | ||
| + | When we bend the beam by 45 degree, there were too much current on the scintilator. Gun grid voltage is lowered to lower the current. | ||
| + | |||
{| border="1" | {| border="1" | ||
| Line 113: | Line 116: | ||
|- | |- | ||
|} | |} | ||
| + | |||
| + | |||
| + | {| border="1" | ||
| + | | Energy Switch || Out (High En) | ||
| + | |- | ||
| + | | Solenoid 1 || 6.8 A | ||
| + | |- | ||
| + | | Solenoid 2 || 1.2 A | ||
| + | |- | ||
| + | | Gun Hor || 0 A | ||
| + | |- | ||
| + | | Gun Ver || +0.2 A | ||
| + | |- | ||
| + | |Output Hor || +1.2 A | ||
| + | |- | ||
| + | | Output Ver || 0 A | ||
| + | |- | ||
| + | | Rep Rate || 8 | ||
| + | |- | ||
| + | | Gun HV || 10 (Knob Setting) | ||
| + | |- | ||
| + | | Gun Grid Voltage || 6.42 (Knob Setting) | ||
| + | |- | ||
| + | | RF frequency ||2856.304 MHz | ||
| + | |- | ||
| + | | Modulator HV Power Supply || 4.28 (Knob Setting) | ||
| + | |- | ||
| + | | RF macro Pulse Length (FWHM) || 300 ns | ||
| + | |- | ||
| + | |Q1 (A)|| -10 | ||
| + | |- | ||
| + | |Q2 (A)|| -10 | ||
| + | |- | ||
| + | |Q3 (A)|| 0 | ||
| + | |- | ||
| + | |Q4 (A)|| -2.3 | ||
| + | |- | ||
| + | |Q5 (A)|| 2.5 | ||
| + | |- | ||
| + | |Q6 (A)|| -3.5 | ||
| + | |- | ||
| + | |} | ||
| + | |||
| + | |||
| Line 118: | Line 165: | ||
| W1 || D1 (A) || D2 (A) || Jaw width (cm) || Time (s) || Counts || counts/second || conditions | | W1 || D1 (A) || D2 (A) || Jaw width (cm) || Time (s) || Counts || counts/second || conditions | ||
|- | |- | ||
| − | | in || 5.8 || 3 || 209.9 || 0.2 || | + | | in || 5.8 || 3 || 0.2 || 209.9 || 844 || 4.02 || D1 tuned for 3 Mev, D2 tuned for 1.2694 MeV |
| + | |- | ||
| + | | in || 5.8 || 5.8 || 0.2 || 239.8 || 1212 || 5.05 || D1 tuned for 3 Mev, D2 tuned for 3 MeV | ||
|- | |- | ||
| − | | in || 5.8 || | + | | in || 5.8 || 9 || 0.2 || 359.9 || 1508 || 4.19 || D1 tuned for 3 Mev, D2 tuned for 4.9 MeV |
|- | |- | ||
|} | |} | ||
Revision as of 21:01, 16 July 2012
Camera Trig
Tune the beam for 15 MeV range, see the beam with camera. Get camera triggering.
Tune The Beam for 11-12 MeV
| Energy Switch | Out (High En) |
| Solenoid 1 | 6.8 A |
| Solenoid 2 | 1.2 A |
| Gun Hor | -0.1 A |
| Gun Ver | 0 A |
| Output Hor | +0.2 A |
| Output Ver | +0.4 A |
| Rep Rate | 8 |
| Gun HV | 10 (Knob Setting) |
| Gun Grid Voltage | 10 (Knob Setting) |
| RF frequency | 2856.272 MHz |
| Modulator HV Power Supply | 4.28 (Knob Setting) |
| RF macro Pulse Length (FWHM) | 300 ns |
| Q1 (A) | -2.6 |
| Q2 (A) | -3.2 |
| Q3 (A) | -3.6 |
| Q4 (A) | -1.5 |
| Q5 (A) | +0.7 |
| Q6 (A) | -3.6 |
Beam Current 0 degree FC: 
Beam Spot at 0 degree OTR screen: 
Scintillator pulse count
Scintillator is located at the end of the 90 degree beamlien (after the thin window). Rates measured with W1 in and out.
| Energy Switch | Out (High En) |
| Solenoid 1 | 6.8 A |
| Solenoid 2 | 1.2 A |
| Gun Hor | 0 A |
| Gun Ver | +0.2 A |
| Output Hor | +1.2 A |
| Output Ver | 0 A |
| Rep Rate | 8 |
| Gun HV | 10 (Knob Setting) |
| Gun Grid Voltage | 10 (Knob Setting) |
| RF frequency | 2856.304 MHz |
| Modulator HV Power Supply | 4.28 (Knob Setting) |
| RF macro Pulse Length (FWHM) | 300 ns |
| Q1 (A) | -10 |
| Q2 (A) | -10 |
| Q3 (A) | 0 |
| Q4 (A) | -2.3 |
| Q5 (A) | 2.5 |
| Q6 (A) | -3.5 |
When we bend the beam by 45 degree, there were too much current on the scintilator. Gun grid voltage is lowered to lower the current.
| W1 | Time (s) | D1 (A) | Jaws | Counts | counts/second | conditions |
| in | 209.1 | 0 | Full open | 1842 | 8.81 | tuned to fc1 10 MeV |
| out | 192.5 | 0 | Full open | 1052 | 5.46 | tuned to fc1 10 MeV |
| in | 226 | 2.5 | Full open | 2082 | 9.21 | tuned to fc2 1 MeV |
| in | 205 | 18.8 | Full open | 1784 | 8.7 | tuned to fc2 10 MeV |
| out | 18.8 | Full open | too much pile-ups | tuned to fc2 10 MeV |
| Energy Switch | Out (High En) |
| Solenoid 1 | 6.8 A |
| Solenoid 2 | 1.2 A |
| Gun Hor | 0 A |
| Gun Ver | +0.2 A |
| Output Hor | +1.2 A |
| Output Ver | 0 A |
| Rep Rate | 8 |
| Gun HV | 10 (Knob Setting) |
| Gun Grid Voltage | 6.42 (Knob Setting) |
| RF frequency | 2856.304 MHz |
| Modulator HV Power Supply | 4.28 (Knob Setting) |
| RF macro Pulse Length (FWHM) | 300 ns |
| Q1 (A) | -10 |
| Q2 (A) | -10 |
| Q3 (A) | 0 |
| Q4 (A) | -2.3 |
| Q5 (A) | 2.5 |
| Q6 (A) | -3.5 |
| W1 | D1 (A) | D2 (A) | Jaw width (cm) | Time (s) | Counts | counts/second | conditions |
| in | 5.8 | 3 | 0.2 | 209.9 | 844 | 4.02 | D1 tuned for 3 Mev, D2 tuned for 1.2694 MeV |
| in | 5.8 | 5.8 | 0.2 | 239.8 | 1212 | 5.05 | D1 tuned for 3 Mev, D2 tuned for 3 MeV |
| in | 5.8 | 9 | 0.2 | 359.9 | 1508 | 4.19 | D1 tuned for 3 Mev, D2 tuned for 4.9 MeV |