PePPO 03132012: Difference between revisions
Jump to navigation
Jump to search
| Line 51: | Line 51: | ||
|} | |} | ||
= | = Annihilation Counter Runs= | ||
| Line 62: | Line 62: | ||
:Det2:=Annihilation Counter #2 (HV2) | :Det2:=Annihilation Counter #2 (HV2) | ||
Revision as of 01:36, 14 March 2012
Accelerator Configuration
- Accelerator Settings
| beam energy | 6.8 MeV |
| Beam type: | Electron |
| I_average: | 0.3 nA |
| I_peak: | 0.05[math]\displaystyle{ \mu }[/math] A 0.006 duty factor |
| pulse width: | 10 [math]\displaystyle{ \mu }[/math]s (it seems on 200 [math]\displaystyle{ \mu }[/math]s is possible?) |
| Rate: | 60 Hz |
| PEPPO Spectrometer: | 151.3 A |
Set HV to Detectors
| Signal channel | HV dac | HV (V) | |
| Detectors #1 | A1 | 2.4 | 960 |
| Detectors #2 | A2 | 3.0 | 1200 |
Scope Pictures
CH1: Beam Sync CH2: A1 CH3: A2
| Target | Pictures |
| No Target |  
|
| Chromox Target |  
|
Annihilation Counter Runs
- Signal Definitions for Trigger logic
- SYNC:=60 Hz sync pulse 200 micro seconds long
- Det1:= Annihilation Counter #1 (HV1)
- Det2:=Annihilation Counter #2 (HV2)
| Run# | run mode | Run length (sec) | Beam | Target | Trig Logic | VME discriminator Threshold (mV) | HV1 (setting/V) | HV2 (setting/V) | PL (setting/ns) | PTW (setting/ns) |
| 2902 | sample | e[math]\displaystyle{ ^- }[/math] | Chromox | (Det1 OR Det2) | 50 | 2.4/960 | 3/1200 | |||
| 2903 | sample | e[math]\displaystyle{ ^- }[/math] | Empty | (Det1 OR Det2) | 50 | 2.4/960 | 3/1200 | |||
| 2905 | sample | e[math]\displaystyle{ ^- }[/math] | Chromox | Det1 AND Det2 | 50 | 2.4/960 | 3/1200 | |||
| 2904 | sample | e[math]\displaystyle{ ^- }[/math] | Empty | Det1 AND Det2 | 50 | 2.4/960 | 3/1200 | |||
| 2908 | sample | off | out | (Det1 or Det2) | 50 | 2.4/960 | 3/1200 | |||
| 2909 | sample | off | out | (Det1 AND Det2) | 50 | 2.4/960 | 3/1200 |