Difference between revisions of "HRRL OTR Test Mar 3rd 2011"
Jump to navigation
Jump to search
| Line 21: | Line 21: | ||
== Determined if the quads are centered on the beam line == | == Determined if the quads are centered on the beam line == | ||
| − | Turn off all the power supplies for the quads. | + | Turn off all the power supplies for the quads. |
| − | + | ||
| + | ===Turn on Quad closesst to HRRL=== | ||
| + | |||
| + | If the beam deflects, try to align quad so there is no deflection | ||
| + | |||
| + | ===Turn on Quad closest to OTR target=== | ||
| + | If the beam deflects, try to align quad so there is no deflection | ||
Revision as of 22:52, 25 February 2011
Objectives
Determined if the steering magnets of the gun are connected to power supply
1. Physically check looking at wires. 2. Change currents on the steering magnet, and observe position of the beam spot. If changes then, connected.
Determined if the OTR target is centered on the beam line
Turn of the all the power supplies for the magnets (include gun steering magnets), then observe beam spot at the OTR target. If the beam is centered on the OTR target, then OTR target is centered on the beam line.
Polarization test
Insert a polarizer film. Take several picture for different orientations without changing beam properties.
Angel is measured with respect to:
| Polarizer Angel | Iamge |
| 200 px | 200 px |
Determined if the quads are centered on the beam line
Turn off all the power supplies for the quads.
Turn on Quad closesst to HRRL
If the beam deflects, try to align quad so there is no deflection
Turn on Quad closest to OTR target
If the beam deflects, try to align quad so there is no deflection