Minimum accelerator energy to run experiment

Go Back

condition 1: fitting the collimator size into the hole

The minimum energy of accelerator (MeV) is limited by fitting the collimator size [math]r_2[/math] into the hole R = 8.73 cm:

[math]x_2 + r_2 = R[/math]

1) Assuming the collimator diameter is [math]\Theta_C[/math]:

[math]\frac{1}{\sqrt{2}}\ (286+183)\ \tan\left(\frac{0.511}{E_{min}}\right) +
       \frac{1}{2}\ (286+183)\ \tan\left(\frac{0.511}{E_{min}}\right) = 8.73 \Rightarrow E_{min} = 33.1\ MeV  [/math]

2) Assuming the collimator diameter is [math]\Theta_C/2[/math]:

[math]\frac{1}{\sqrt{2}}\ (286+183)\ \tan\left(\frac{0.511}{E_{min}}\right) +
       \frac{1}{2}\ (286+183)\ \tan\left(\frac{1}{2}\ \frac{0.511}{E_{min}}\right) = 8.73 \Rightarrow E_{min} = 26.3\ MeV  [/math]

3) Assuming the collimator diameter is [math]\Theta_C/4[/math]:

[math]\frac{1}{\sqrt{2}}\ (286+183)\ \tan\left(\frac{0.511}{E_{min}}\right) +
       \frac{1}{2}\ (286+183)\ \tan\left(\frac{1}{4}\ \frac{0.511}{E_{min}}\right) = 8.73 \Rightarrow E_{min} = 22.8\ MeV  [/math]

4) for arbitrary collimator size [math]\Theta_C/2[/math]:

All energy under this line is good to run experiment for condition above

condition 2: F1A = 286 cm

1) assuming the collimator diameter is [math]\Theta_C[/math]

[math] E_{min} = 73.7\ MeV  [/math]

2) assuming the collimator diameter is [math]\Theta_C/2[/math]

[math] E_{min} = 36.9\ MeV  [/math]

3) assuming the collimator diameter is [math]\Theta_C/4[/math]

[math] E_{min} = 18.4\ MeV  [/math]

4) for arbitrary collimator size [math]\Theta_C/m[/math]:

All energy under this line is good to run experiment for condition abov

both conditions above are together

All energy under this linse is good to run experiment for both conditions above

Go Back