Difference between revisions of "Geometry (25 MeV LINAC exit port)"
Jump to navigation
Jump to search
Line 36: | Line 36: | ||
1) assuming the collimator diameter is <math>\Theta_C \Rightarrow E_{min} = 33.1\ MeV </math> | 1) assuming the collimator diameter is <math>\Theta_C \Rightarrow E_{min} = 33.1\ MeV </math> | ||
− | 2) assuming the collimator diameter is <math>\Theta_C \Rightarrow E_{min} = 33.1\ MeV </math> | + | 2) assuming the collimator diameter is <math>\Theta_C / 2 \Rightarrow E_{min} = 33.1\ MeV </math> |
− | 3) assuming the collimator diameter is <math>\Theta_C \Rightarrow E_{min} = 33.1\ MeV </math> | + | 3) assuming the collimator diameter is <math>\Theta_C / 4 \Rightarrow E_{min} = 33.1\ MeV </math> |
4) for arbitrary collimator size <math>\frac{\Theta_C}{m}</math>: | 4) for arbitrary collimator size <math>\frac{\Theta_C}{m}</math>: |
Revision as of 18:50, 14 June 2010
Minimum accelerator energy to run experiment
condition 1: fitting the collimator size into the hole
The minimum energy of accelerator (MeV) is limited by fitting the collimator size
into the hole R = 8.73 cm:
1) Assuming the collimator diameter is
:
2) Assuming the collimator diameter is
:
3) Assuming the collimator diameter is
:
4) for arbitrary collimator size:
All energy above this line is good to run experiment
condition 2: F1A = 286 cm
1) assuming the collimator diameter is
2) assuming the collimator diameter is
3) assuming the collimator diameter is
4) for arbitrary collimator size
:All energy above this line is good to run experiment
both conditions above are together
All energy above this lines is good to run experiment
25 MeV geometry
geometry calculation
collimator diameter | |||||||||
---|---|---|---|---|---|---|---|---|---|
4.13 cm | 6.78 cm | 2.92 cm | 4.79 cm | 75 cm | 143 cm | ||||
4.13 cm | 6.78 cm | 1.46 cm | 2.40 cm | 136 cm | 203 cm |
geometry pictures
how it looks 1 ( , box 3"x4" and then pipe 4")
File:Vacuum pipe collimator .png
how it looks 2 ( , box 3"x4" and then pipe 4")
File:Vacuum pipe collimator .png